According to the Schematics you provide, your RGB lines are pins 12, 13, and 14 on the IC801 chip. You have to zoom in on the very last page (pg 32).theangryamoeba wrote:I recently trash picked a Sanyo DS24425. It's a got nice bright tube and all of the inputs that i thought I would need. Composite, S-video and Component. Then I read about RGB.
I was able to find the service manual for the set, but i'm not seeing any RGB lines that I can tap. Can someone else take a look at this and let me know if I'm missing something obvious?
https://drive.google.com/file/d/10zmhRo ... sp=sharing
On further inspection, it doesn't look like IC801 has RGB IN, but it does have RGB OUT that is pulled from the 'Video Matrix', which looks like it takes YPbPr and (encodes?) it to RGB before directly shooting it to a trio of transistors (Q721, Q711, and Q701) immediately before the actual screen itself. You might be able to interpose a properly adjusted RGB signal either before or after those transistors.