OSSC and PC engine Issue [Solved]
-
Mobiusstriptech
- Posts: 239
- Joined: Fri Dec 23, 2016 7:28 am
- Location: Ohio,USA
- Contact:
Re: OSSC and PC engine Issue
Honestly I'm not sure. Voultar first showed it off this time last year. I have seen the boards but I don't know what his timeline is. Whenever he does decide to release it, I know quite a few people that will be after it.
For mod work and questions email us at mobiusstriptech@gmail.com
Twitter: @mobiusstriptech
Youtube: MobiusStripTech
Website: https://www.mobiusstriptechnologies.com/
Twitter: @mobiusstriptech
Youtube: MobiusStripTech
Website: https://www.mobiusstriptechnologies.com/
Re: OSSC and PC engine Issue
Shame, guess he's knee-deep in hot glue and Brasso and didn't have the time to get to it yet :/
-
- Posts: 707
- Joined: Sun Aug 21, 2016 5:18 pm
Re: OSSC and PC engine Issue
I mean I'm not trying to pick nits but it's not. It's a 7374. You can see it right in the name, description, and in the picture of my assembled kit on the chip itself earlier in this thread. Or rather, the one I was referring to is a 7374 kit: https://console5.com/store/ths7374-rgb- ... ngine.html.Mobiusstriptech wrote:That kit is a totally different amp. It's a 7316 based kit and not a 7374. The 7316 would not have the issue that the 7374 kits will. Namely because the 7316 is a 3 channel amp and not a 4 channel.
-
Mobiusstriptech
- Posts: 239
- Joined: Fri Dec 23, 2016 7:28 am
- Location: Ohio,USA
- Contact:
Re: OSSC and PC engine Issue
You're right. Apparently they have both a 7374 and a 7316 kit up now. Luke must be getting them made himself now because mickcris stopped selling them more than a year ago. So you are correct that they apparently have a DIY 7374 kit. However that kit does still have the channel 4 problem as they noted and it also doesn't handle sync. Which would still be an issue for the OP.
For mod work and questions email us at mobiusstriptech@gmail.com
Twitter: @mobiusstriptech
Youtube: MobiusStripTech
Website: https://www.mobiusstriptechnologies.com/
Twitter: @mobiusstriptech
Youtube: MobiusStripTech
Website: https://www.mobiusstriptechnologies.com/
-
mimylovesjapan
- Posts: 143
- Joined: Wed Oct 14, 2015 1:29 pm
- Location: Japan, Osaka
Re: OSSC and PC engine Issue
OK ! Problem solved by increasing Sync tolerance on OSSC board !
Thank you everyone !
Thank you everyone !
-
- Posts: 645
- Joined: Mon Nov 11, 2013 4:06 pm
Re: OSSC and PC engine Issue
Which sync tolerance settings did you adjust, and to which values?mimylovesjapan wrote:OK ! Problem solved by increasing Sync tolerance on OSSC board !
Thank you everyone !
I ask because there is V tolerance, H tolerance, PLL, etc.
-
mimylovesjapan
- Posts: 143
- Joined: Wed Oct 14, 2015 1:29 pm
- Location: Japan, Osaka
Re: OSSC and PC engine Issue [Solved]
I don't really remember, but if I check my OSSC sync option, H Sync Tolerance is now at 1.84 us.
Re: OSSC and PC engine Issue [Solved]
I too am having this issue with my PC Engine Duo R. I will try adjusting the Sync tolerance this weekend and post up my results