Hello,
I have a European Trinitron KV-21CL10E that runs in RGB just fine and a couple things that output RGB signals (an XBOX, a raspberry pi, a PS2 and also a 15khz pc). Up until now all of them worked just fine, but since last morning only the PS2 will display video in RGB! all the other systems will not. I have another, smaller samsung CRT that also runs in RGB and for instance, this one does display the RGB image off my pi that gets a fully black screen on my trinitron. Could someone give me guidance please? It just started acting erratically and I don't know where to ask ...
Thanks in advance.
Trinitron RGB TV becomes picky?
-
mvsfan
- Posts: 1209
- Joined: Sat Oct 06, 2012 12:24 am
Re: Trinitron RGB TV becomes picky?
I dont know whats special about that playstation, but it almost doesnt make sence that it works and the rest of the consoles dont.
are you using a scart switch? if yes, your scart switch could have a fault in it where only 1 port is working. I would try plugging each console into the tv directly, and see if they work then. if they do, bad switch.
are you using a scart switch? if yes, your scart switch could have a fault in it where only 1 port is working. I would try plugging each console into the tv directly, and see if they work then. if they do, bad switch.
-
Syntax
- Posts: 1827
- Joined: Wed Aug 09, 2017 12:10 am
- Location: Australia
Re: Trinitron RGB TV becomes picky?
Ps2 is the only system he has that outputs RGsB.
I hope the tv's jungle hasn't had a brain fart and got stuck in component mode.
I hope the tv's jungle hasn't had a brain fart and got stuck in component mode.