BrezzaSoft Crystal System... same leaking battery issue ??!

The place for all discussion on gaming hardware
Post Reply
User avatar
cvaniafan
Posts: 447
Joined: Thu Sep 25, 2008 11:03 pm
Location: Франция !

BrezzaSoft Crystal System... same leaking battery issue ??!

Post by cvaniafan »

Image

Hi all

I learned that my Crystal System mobo running The Crystal Of Kings has the very same shitty leaking battery as the one destroying the PGM and older MVS mobo's ! :evil:

So, as for the PGM and MVS, I thought that battery could be removed without affecting the Crystal mobo to work normally...

However, I have read two different stories about it:
- in his advert, this seller on eBay explained it's working fine without the original battery (it just doesn't save the settings): http://www.ebay.it/itm/PCB-JAMMA-BREZZA ... 1656072328

But in this topic, the guy says his Crystal mobo no longer boots after the battery removal: http://www.neo-geo.com/forums/showthrea ... gs-battery!!!

Who's right.. any advice ?

Thanks !
User avatar
nem
Posts: 934
Joined: Wed Feb 16, 2005 8:26 am

Re: BrezzaSoft Crystal System... same leaking battery issue

Post by nem »

It will work just fine without a battery.
User avatar
cvaniafan
Posts: 447
Joined: Thu Sep 25, 2008 11:03 pm
Location: Франция !

Re: BrezzaSoft Crystal System... same leaking battery issue

Post by cvaniafan »

nem wrote:It will work just fine without a battery.
Thanks nem, I hope so 'cause now I'm going to remove it carefully
User avatar
cvaniafan
Posts: 447
Joined: Thu Sep 25, 2008 11:03 pm
Location: Франция !

Re: BrezzaSoft Crystal System... same leaking battery issue

Post by cvaniafan »

Done ! :) You were right nem, I'm glad to see it works fine !
I've been extremely cautious, it was not that easy to unsolder that battery... The tin is quite hard, had to use a 40W soldering iron!
What a shame this little piece of hardware was abandoned after very few games, the Crystal System is a beast for 2D!
Post Reply