Here, we will share the joys of playing games on small CRTs simply because they're fun.
I've been playing Valis IV among other PCE titles today on a 9" Panasonic WV-CM1000/G. I really enjoy the picture quality even though the monitor is composite only. It's a great companion for the AV Famicom as well. Funnily enough, the only photo I've seen of these with the front panel cover still intact is in the brochure.
~The artist currently known again as TheRedKnight~
Fighting game tournament stuff: ninlia.home.blog
What classifies as a small CRT? 9 and 10 inches? Also 13 and 14 inches as the larger small crt's maybe? I actually kind of enjoy small monitors. Gives you that kid's room tv feeling (and I don't mean that in a bad way). Great for single player, and you can play with your face really up close to the screen for some great fun.
I have a Sony PVM 9044Q. Pretty nice little monitor but only really good for a bench monitor. That's what I use it for, so I don't have to keep plugging and unplugging everything in the main setup. Most of my setup is running RGB, but I have a Sharp Twin Famicom that I don't plan to mod. I'm actively looking for a nice 13" or 14 " consumer Trinitron to set that up on.
I bought one of those slick Sony Trinitron CPD-9000 9" RGB monitors brand new off of ebay many moons ago. It can handle 320 x 240 all the way up to 640 x 240 formats, indeed, as indicated in the instruction manual. With zero burn-in issues to contend with and the obligatory scanlines in place, it's a great low-res 15.7 kHz RGB monitor companion piece for 'em arcade jamma pcbs alongside with a micro supergun setup. Has a single RGB input port that use a proprietary cable to use it properly though (no RCA composite video nor S-Video inputs whatsoever).
As impractical a small RGB monitors are, there is something charming about them
I have a 8041Q which was my first pro monitor. Didnt really get the chance to use it to much since i got a 1954Q within a couple of weeks of getting it. I'd love to have a good reason too use it but i havent been able to find one.
Wachenroder wrote:As impractical a small RGB monitors are, there is something charming about them
I have a 8041Q which was my first pro monitor. Didnt really get the chance to use it to much since i got a 1954Q within a couple of weeks of getting it. I'd love to have a good reason too use it but i havent been able to find one.
I wish to have one so bad but where I live it is almost impossible to find one at a decent price.
mvsfan wrote:They are great for using on your workbench to test Consoles.
I keep a PVM-8045Q in my car's trunk when I go to fleamarkets to test any systems I might find. VERY handy (and has Composite, S-Video, RGB and Component) - another handy use for these older systems you can't hookup to a flatscreen very easily.
Dochartaigh wrote:I keep a PVM-8045Q in my car's trunk when I go to fleamarkets to test any systems I might find. VERY handy (and has Composite, S-Video, RGB and Component) - another handy use for these older systems you can't hookup to a flatscreen very easily.
Got this nice little set on Monday. Picture tube is average, but it has great sound. It's 50 or 60 HZ as well. Not sure how old it is because I couldn't find any dates on the thing itself or the manual, but it was fun to be able to unbox a CRT.
My S-Video cable is borked, so I get this distortion wave on the screen when I use it on my SNES. The funny thing is, when I use it on my N64, it's fine.
UncleSilver wrote:My S-Video cable is borked, so I get this distortion wave on the screen when I use it on my SNES. The funny thing is, when I use it on my N64, it's fine.
Do you have an OEM adapter on your SNES? If you have an aftermarket one, they often have poor shielding and cause this. To me, if your S-video cable was borked, it wouldn't work on one console and not the other. It would be borked all the time.
UncleSilver wrote:My S-Video cable is borked, so I get this distortion wave on the screen when I use it on my SNES. The funny thing is, when I use it on my N64, it's fine.
Do you have an OEM adapter on your SNES? If you have an aftermarket one, they often have poor shielding and cause this. To me, if your S-video cable was borked, it wouldn't work on one console and not the other. It would be borked all the time.
I tried three aftermarket S-Video cables and they're shit to be honest (even bought the ones fellow members swear by). Get the official Nintendo one (think it's like $35 on eBay), or there's a guy in Sweden (maybe Switzerland) who custom makes a really nice high quality shielded one for $20 too.
I tried three aftermarket S-Video cables and they're shit to be honest (even bought the ones fellow members swear by). Get the official Nintendo one (think it's like $35 on eBay), or there's a guy in Sweden (maybe Switzerland) who custom makes a really nice high quality shielded one for $20 too.
I've been seeing that swedish cable. I'm tempted, but I may just stick with the Nintendo brand, or save up for the monster cable.