BVM-20f1u horizontal phase way off.

[mrmop520]

I recently came into two bvm-20f1u models and one of them has an odd issue where the image is shifted way too far to the right. The image from the far right ends up coming in on the left side with about 1/3 of the screen being black. I'm wondering what may be the issue here, whether resetting factory settings on the different boards will help, or if this is something that needs manual adjustment. Here's two pics to show when h phase is at 0, and at around 100 when you can see the end of the picture showing up on the left. It's not anything related to sync as the picture is steady and looks good for what portion is viewable on the screen.

[viletim]

I can't help with your problem, but keep in mind that it's not possible to adjust away a hardware fault.

[mrmop520]

Yeah I have a feeling its something that got banged up internally - another bvm I tested where I got these 2 had the same issue, but it was the bvm-14F5U model. Luckily these were cheap and the other one's picture looks good outside of some pincushion stuff that shouldn't be any issue to fix. Got this messed up one thinking it may be fixable, if not its not like it cost me much!

[mrmop520]

In case anyone runs into this problem - it was the H-delay button. Hit it thinking it was the sync button, but didn't have shift down. Doh!

[ryuuji]

Nice. I wish I would get my hand on one of those for cheap