Beovision mx4200 - turn on without remote ?

[Apfolmer]

Is it possible to connect some wires inside, or any setting, so that it will turn on, when signal is turned on from scart ?

I have connected 12v on pin8, with no result.

It must be possible to get a picture without to use the remote ??

[blizzz]

You can set AV2 to tv channel 1. That way you can turn on the TV and get a picture by pushing the physical button below the screen.

Go to Menu > Setup > Sockets, set AV2 to Decoder. Switch to TV channel 1 and go to Menu > Setup > Tuning, set Decoder to On. Now AV2 will show when you wake up the TV from standby with the channel button.

[Apfolmer]

Yes

But the tv Do NOT turn on from sleep mode, without presdibg something on the Remote,,,,, right ?

[blizzz]

It will turn on when you press the channel button on your TV. You don't need the remote.

[Apfolmer]

The mx4200 doent have Any buttons exept the on/OFF seitch

[blizzz]

Oh, sorry then. Didn't know that they removed the button on the MX4200.

[Apfolmer]

Maybe only on outside

Can anyone check the connections inside the 4000/4002 and see where the channel buttons are connected ? Then I can make external seitch