So I have a DVDO Edge that is not outputing a signal from its HDMI OUT at all. If I connect the audio only output I get a blue screen at least, but no signal at all from the video output. As far as I can tell the unit is receiving a signal.
I tried a reset, but it didn't help. I couldn't find any information about this problem via Google, so I was hoping someone here might have some insight into my problem. I'm hoping at worst it's just a bad HDMI port and I can just replace it, rather than something more serious.
DVDO Edge no picture
-
Galgomite
- Posts: 199
- Joined: Fri May 17, 2013 6:32 pm
- Location: Pennsylvania, USA
Re: DVDO Edge no picture
I have an Edge but I'm sorry nothing's coming to mind. The obvious stuff, of course is worth doing (make sure connections are snug and swap out HDMI cables).
-
BuckoA51
- Posts: 3424
- Joined: Sat Oct 02, 2010 10:08 am
- Location: Ireland
- Contact:
Re: DVDO Edge no picture
I had the whole HDMI board blow on my old DVDO Edge, ABTs service centre here at the time just replaced the unit though.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page