emulation UVC ultracade xbox vs 360

[DAVI22]

Hello, I have connected console of xbox and of 360 to the uvc ultracade and see great difference in brightness and quality of image and color ... one sees better in 360! Does someone know because? Or if I must form something in the ancient Xbox in order that one sees mas clear the image? Thank you

[Guspaz]

Three things to check:

1) Are you feeding it 480p input with 240p output?
2) Did you adjust the output signal levels with resistors before passing the output to the display (if you're using a consumer display)
3) Did you correctly pre-process the image with an RGB interface to correct for the line offset problem?

[rugdoctor]

also check for any applied image filters...

[DAVI22]

1: That's correct 480p input 240p output
2: I use neither resistances nor anything uvc directly to jamma
3: I do not use ningun type of interface RGB
4: at first though then he will verify it when it returns of my work, there is no filter in Xbox's emulator not in of 360

The Xbox and 360 are connected equally across a Neoya x2vga2 Porqué one sees better in 360 that the original Xbox if both are output 480p?
There is some type of switch in uvc that could improve the image in xbox?
Thanks

[DAVI22]

The filters of both consoles were deactivated, I have tried activating filters of xbox1 in coinops and it has improved a bit but one does not see so well like in 360... Not if 360 it brings native resolution VGA and the Xbox 1 not, because it was waiting for better result in Xbox 1 Someone has proved both consoles with uvc and knows because the image is so little clear?
The monitor is a trifrequency of an Arcadian candy

Someone you have the Xbox 1 connected one to the uvc and can put a photo of some game to compare with the mio? Thank you

[DAVI22]

Fitting the dimmers of the Recreative one I have solved it, thank you very much