Setting YPBPR via BKM21-D, don't see it in the menu?

[Koop]

Hey guys trying to output YPBPR via my BKM21-D which is in my bvm-20f1u.

I go to Format -> Component -> _____

Here I only see three options.

YUV SMPTE/EBU-N10
YUV BETACAM SETUP 0
RGB

Shouldn't YPBPR be an option? I should be on the correct slot and INPUT NO is set to 456.

Any advice?

[bobrocks95]

Hey guys trying to output YPBPR via my BKM21-D which is in my bvm-20f1u.

I go to Format -> Component -> _____

Here I only see three options.

YUV SMPTE/EBU-N10
YUV BETACAM SETUP 0
RGB

Shouldn't YPBPR be an option? I should be on the correct slot and INPUT NO is set to 456.

Any advice?

YUV is YPbPr for all intents and purposes. Unless you're using a Sony Betacam I'm going to guess the first option is what you want. You didn't give them all a try anyway?

[Koop]

I'm dumb I didn't have sync set to INT, looks fine set to YUV SMPTE/EBU-N10.

odd though I wonder why I don't see YPBPR like this dude?

Spoiler

[korpse413]

Are you positive the source picture is a 20F1u and not a D20F1u? YPbPr is a 480p signal right?

[Guspaz]

YPbPr can do pretty much anything from 240p through 1080i, although many devices don't support 240p.

[Koop]

Are you positive the source picture is a 20F1u and not a D20F1u? YPbPr is a 480p signal right?

YPbPr can do pretty much anything from 240p through 1080i, although many devices don't support 240p.

Ah well that would explain it then... If YPbPr is only 480p and above I would not have that as an option as the 20f1u can only do up to 480i.

I only thought YPbPr had to do with the color and not the resolution. I guess I am still just a big noob?

[Ikaruga11]

Component is capable of anything from 240p to 1080p.