Hello all,
Question - I wanted to play the Taito Type X2 games on my Egreet II but the Egreet II CRT is only 15khz and 24khz.. I thought that the Capcom I/O would downscale the 31khz from the Taito Type x2 to 15khz but I did not see that.. am I missing a setting at the I/O or at the Type X2 system to make the system work on the Egreet II CRT? Thank you for reading and for your input.
Taito type x2 system on Egreet II, Capcom I/O question?
-
SNK-NEO-GEO
- Posts: 541
- Joined: Sat Feb 07, 2015 2:58 pm
- Location: zip code 20151 USA
Taito type x2 system on Egreet II, Capcom I/O question?
The Future Is Now
-
chempop
- Posts: 3466
- Joined: Sun Jul 31, 2005 7:44 am
- Location: Western-MA USA
Re: Taito type x2 system on Egreet II, Capcom I/O question?
taken from here: http://wiki.arcadeotaku.com/w/Taito_Type_X²
p.s. not holding a grudge, happy to set aside differences.DIP Switches
Setting Dip Switch #2 to ON will enable 720p Video Output; setting Dip Switch #2 to OFF will enable 480p output. The Type X2 only outputs 31khz video; older monitors which only display 15khz/24khz video will require a VGA to CGA converter.
"I've had quite a few pcbs of Fire Shark over time, and none of them cost me over £30 - so it won't break the bank by any standards." ~Malc
-
SNK-NEO-GEO
- Posts: 541
- Joined: Sat Feb 07, 2015 2:58 pm
- Location: zip code 20151 USA
Re: Taito type x2 system on Egreet II, Capcom I/O question?
Thank you very much and thank you for the link.. No grudges here and happy to see that you replied to my tread offering help:)
chempop wrote:taken from here: http://wiki.arcadeotaku.com/w/Taito_Type_X²
p.s. not holding a grudge, happy to set aside differences.DIP Switches
Setting Dip Switch #2 to ON will enable 720p Video Output; setting Dip Switch #2 to OFF will enable 480p output. The Type X2 only outputs 31khz video; older monitors which only display 15khz/24khz video will require a VGA to CGA converter.
The Future Is Now