Does anyone know how to get ntsc vc n64 games to work over RGB scart on a pal wi? I have the games running using a modded pal Wii but NTSC wii software doesn't want to output via RGB scart (you get a red tinted picture) as the NTSC consoles wiis don't use scart.
Cheers
How to get ntsc vc n64 games to work on a pal wii
-
andykara2003
- Posts: 1349
- Joined: Sat Apr 27, 2013 3:26 pm
-
blizzz
- Posts: 1150
- Joined: Fri Sep 16, 2011 6:19 pm
- Location: Germany
- Contact:
Re: How to get ntsc vc n64 games to work on a pal wii
Use Triiforce. Boot from NAND and force PAL 480i output. You will get 60Hz 240p RGB with correct colors that way for most systems. NeoGeo doesn't work as far as I know.
You might also be able to boot the games through another loader and possibly from a NAND backup, but that always crashes on my Wii.
You might also be able to boot the games through another loader and possibly from a NAND backup, but that always crashes on my Wii.
-
andykara2003
- Posts: 1349
- Joined: Sat Apr 27, 2013 3:26 pm
Re: How to get ntsc vc n64 games to work on a pal wii
Thanks Blizzz, much appreciated.blizzz wrote:Use Triiforce. Boot from NAND and force PAL 480i output. You will get 60Hz 240p RGB with correct colors that way for most systems. NeoGeo doesn't work as far as I know.
You might also be able to boot the games through another loader and possibly from a NAND backup, but that always crashes on my Wii.
-
andykara2003
- Posts: 1349
- Joined: Sat Apr 27, 2013 3:26 pm
Re: How to get ntsc vc n64 games to work on a pal wii
Just a thought, does anyone know of a loader that can do this directly from the wii dashboard screen?