That happened to be one of the best things I liked during my testing when I turn the sharpness up, the details really POP on screen like a crt does. I just think it's a little too sharp for my case and I usually prefer the hybrid option to make up the difference.Xyga wrote: Had to boost the monitor's brightness significantly of course, and the contrast a bit too (some colors or gamma adjustments might be necessary depending on the display) but that's not a problem. Funnily the monitor's sharpness control turned into a quick brightness booster when I increase it above the neutral setting, which looks good and is very useful.
Only one thing would make that mode even better; separate strenght setting for the vertical lines (dunno if that's technically possible)
I'm not sure if you said there were separate scanline strengths for both horizontal/vertical. Part of the reason why I had an slg on the chain in the first place was to have these controls and imitate various displays from standard crts, to a Trinitron/Wega. Anyway since some games are getting linedoubled from the start, how's 4x (960p) look?
I'm planning to upgrade my firmware once everything is sorted out, but I'll see whether I'm brave enough to try the beta. Probably not (bok bok)
Edit: btw I'm reading about that overlay sampling and I'm not sure if it applies to the same thing MAME does where you draw your own graphic overlay. If it ends up being the case, I'm pretty sure I can dig up some of the stuff I was messing around with a decade ago and see if it can be applied here.