The screen looks great but the top right of the view-able area is messed up. Any help would be oh so greatly appreciated. I have tried all of the manual switches, but cannot get the top right corners geometry corrected. To give you an idea, the image should be a square shape, 3 of the four corners sit at 90 degree angle, except the top right is shorter than the others.
http://i1246.photobucket.com/albums/gg6 ... e57c76.jpg
http://i1246.photobucket.com/albums/gg6 ... 6dedde.jpg
Sony BVM 1911 HR geometry issue
-
Thamiel
- Posts: 180
- Joined: Wed Feb 15, 2012 2:21 am
Re: Sony BVM 1911 HR geometry issue
Probably the wrong way to do it, but I solved a similar issue on a PVM by sticking some strong speaker magnets to the metal shielding behind the tube and dragging the corner into place. A quick degassing and I was set.
Only reason I went that way though was the pots wouldn't correct it, try those first.
Only reason I went that way though was the pots wouldn't correct it, try those first.