Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
One of my Sanwa Sticks is pretty much worn out and I thought about replacing it with a Seimitsu one but afaik Seimitsu doesn't offer octogonal restrictors. Can I use my Sanwa one?
WTB: Arkanoid II Revenge Of Doh PCB, Outzone PCB, Fixeight PCB
Re: Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
short answer: no
some one correct me if i am wrong
some one correct me if i am wrong
Re: Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
i do not believe so either. they use different restrictor systems seimitsu's screw in and sanwa's snap in
(2x middle fingers)
-
drunkninja24
- Posts: 1802
- Joined: Thu Oct 01, 2009 3:27 am
- Location: MO
Re: Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
If you have an LS-32, there is a Round restrictor for it. There's also an octagonal restrictor for the LS-56.
-
Devil Soundwave
- Posts: 55
- Joined: Wed Jun 03, 2009 10:08 am
- Location: North London, UK
Re: Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
As others have said, no, but You could always try some hackery and see what you come up with!
Quite a few peeps mess with sticks - teh Suzo/Sanwa combo favoured by some of our Euro chums springs to mind.
Quite a few peeps mess with sticks - teh Suzo/Sanwa combo favoured by some of our Euro chums springs to mind.
Re: Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
OK, thanks for the replies.
The LS-56 seems to have a longer shaft and bigger deadzones than the LS-32, right? So it doesn't really have an advantage over a Sanwa stick.
I think I'll just replace my old Sanwa with a new one as I'm so much used to the octogonal restrictor.
The LS-56 seems to have a longer shaft and bigger deadzones than the LS-32, right? So it doesn't really have an advantage over a Sanwa stick.
I think I'll just replace my old Sanwa with a new one as I'm so much used to the octogonal restrictor.
WTB: Arkanoid II Revenge Of Doh PCB, Outzone PCB, Fixeight PCB
-
drunkninja24
- Posts: 1802
- Joined: Thu Oct 01, 2009 3:27 am
- Location: MO
Re: Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
The LS-56 is probably the tightest Japanese stick out there. Mine feels right at home playing Futari, though yes, the shaft is a bit longer. It has a much different feel than a Sanwa, and is the only Japanese stick I recommend using with Octagonal gates (JLF w/ Octagonal just never felt right to me).antares wrote:OK, thanks for the replies.
The LS-56 seems to have a longer shaft and bigger deadzones than the LS-32, right? So it doesn't really have an advantage over a Sanwa stick.
I think I'll just replace my old Sanwa with a new one as I'm so much used to the octogonal restrictor.
Re: Can I use my Sanwa Octogonal Restrictor on a Seimitsu Stick?
Well, maybe I'll order both to see which one I like more
WTB: Arkanoid II Revenge Of Doh PCB, Outzone PCB, Fixeight PCB