Roommate's Lathe is finally gone, which PCBs should I buy

cicada88 · Post by **cicada88** » Tue Oct 15, 2013 11:30 pm

I found a video on youtube of Ketsui, it looks cooler than Ibara. Reminds me of extension of DaiOuJou graphically.

and to all the people pm me, lathe was already sold no longer available

shmuppyLove · Post by **shmuppyLove** » Wed Oct 16, 2013 1:18 am

cicada88 wrote:I found a video on youtube of Ketsui, it looks cooler than Ibara.

Quoted for great justice.

Ed Oscuro · Post by **Ed Oscuro** » Wed Oct 16, 2013 5:22 am

I was highly disappointed when I learned more details about Arvin's lathe. It was just some kind of lame wood scrimshaw device - like a belt-driven woodpecker - instead of the death metal lathes famed worldwide (by demons, cultists, and members of Holy Church alike) that summon demons and heroes of fire and iron.

Vyxx · Post by **Vyxx** » Wed Oct 16, 2013 1:35 pm

cicada88 wrote:I found a video on youtube of Ketsui, it looks cooler than Ibara.

You should feel bad.

cicada88 · Post by **cicada88** » Wed Oct 16, 2013 3:17 pm

Vyxx wrote:
cicada88 wrote:I found a video on youtube of Ketsui, it looks cooler than Ibara.
You should feel bad.

I don't feel bad. I just like the look of pure futuristic neonlight highrise megatropolis not some gothic little girl fantasy land bee ess

But it's just looks not sure on gameplay

PurpBullets · Post by **PurpBullets** » Wed Oct 16, 2013 3:38 pm

This thread is gold.
Ive known some "alvins" in my day, fucking shady mumbling beer bumming mahfuhs.

Ibara is theoretically infinite in its horizon of potential improvement.
If I had to choose 1 STG to play for the rest of my life and only 1, it would be vanilla Ibara.

but
I hope everyone hates Ibara.

Yeah! Dont buy those Ibara pcbs!
I hope people have trouble selling an Ibara pcb for $100.00.

I remember around 2010/11 I saw an ibara for $210.00.

cicada88 · Post by **cicada88** » Wed Oct 16, 2013 3:41 pm

PurpBullets wrote:This thread is gold.
Ive known some "alvins" in my day, fucking shady mumbling beer bumming mahfuhs.

Ibara is theoretically infinite in its horizon of potential improvement.
If I had to choose 1 STG to play for the rest of my life and only 1, it would be vanilla Ibara.

but
I hope everyone hates Ibara. Yeah! Dont buy those Ibara pcbs!
I hope people have trouble selling an Ibara pcb for $100.00.
I remember around 2010/11 I saw an ibara for $210.00.

ty, it's probably a great game. but first pcb is like popping cherry, first one must be good play and attractive looks

trap15 · Post by **trap15** » Wed Oct 16, 2013 3:44 pm

Then stop f around and just get Kyuukyoku Tiger.

cicada88 · Post by **cicada88** » Wed Oct 16, 2013 3:48 pm

trap15 wrote:Then stop f around and just get Kyuukyoku Tiger.

i might although the smell of first pcb is not so significant as first girl

PurpBullets · Post by **PurpBullets** » Wed Oct 16, 2013 3:52 pm

trap15 wrote:Then stop f around and just get Kyuukyoku Tiger.

This ^
Just wait until you get a good whiff of that Kyuukyoku board.

Imhotep · Post by **Imhotep** » Wed Oct 16, 2013 4:07 pm

I recommend something Psikyo or Takumi for best value.

cools · Post by **cools** » Wed Oct 16, 2013 4:08 pm

Well, if not Ibara, then Raiden DX.

cicada88 · Post by **cicada88** » Wed Oct 16, 2013 4:50 pm

cools wrote:Well, if not Ibara, then Raiden DX.

I will search it although the title reminds me of game boy color game for some reason

cicada88 · Post by **cicada88** » Wed Oct 16, 2013 4:58 pm

OK Raiden DX looks good. It's like Tom Cruise from Top Gun sent on extra secret scientology mission in outer space, which is better Raiden DX or R-Type. Which is cheaper?

cicada88 · Post by **cicada88** » Wed Oct 16, 2013 4:59 pm

PurpBullets wrote:
trap15 wrote:Then stop f around and just get Kyuukyoku Tiger.
This ^
Just wait until you get a good whiff of that Kyuukyoku board.

Father might know best for once, how much does this board go for?

cools · Post by **cools** » Wed Oct 16, 2013 5:04 pm

cicada88 wrote:OK Raiden DX looks good. It's like Tom Cruise from Top Gun sent on extra secret scientology mission in outer space, which is better Raiden DX or R-Type. Which is cheaper?

DX by a long way.

PurpBullets · Post by **PurpBullets** » Wed Oct 16, 2013 5:05 pm

I see 2 Twin Cobras on ebay for $145.00 each.
I dont know anything about region differences though?

Honesty Kyuukyoku Tiger is harder than Ibara IMHO.
and I have an A score 1cc in vanilla Ibara.

cicada88 · Post by **cicada88** » Wed Oct 16, 2013 5:09 pm

PurpBullets wrote:I see 2 Twin Cobras on ebay for $145.00 each.
I dont know anything about region differences though?

Honesty Kyuukyoku Tiger is harder than Ibara IMHO.
and I have an A score 1cc in vanilla Ibara.

I will only buy japanese versions, but it gives me idea of price roughly ty

PurpBullets · Post by **PurpBullets** » Wed Oct 16, 2013 5:16 pm

To get a japanese version might not be the same price?
I really dont know.
Trap15 or someone more experienced will have to chime in.

trap15 · Post by **trap15** » Wed Oct 16, 2013 5:34 pm

MAK Japan has one for 26,250 JPY (about $275 USD). That seems a bit high though, should be able to get one cheaper than that.

TRY, G-Front, and TOPS don't have it though, so I'm not sure where to look. Yahoo Auctions JP also didn't have one.

moh · Post by **moh** » Wed Oct 16, 2013 6:19 pm

I just like the look of pure futuristic neonlight highrise megatropolis not some gothic little girl fantasy land bee ess

<3

jepjepjep · Post by **jepjepjep** » Wed Oct 16, 2013 8:03 pm

Ketsui is always a good choice!

cicada88 wrote: My father was drunk and told me to stop f around and just get Kyukyoku Tiger.

That's sig worthy.

trap15 · Post by **trap15** » Wed Oct 16, 2013 8:25 pm

jepjepjep wrote:
cicada88 wrote: My father was drunk and told me to stop f around and just get Kyukyoku Tiger.
That's sig worthy.

And it's done

cicada88 · Post by **cicada88** » Mon Oct 21, 2013 1:46 am

Thanks for the help and suggestions everyone.

It looks like I will be going with ESP Ra De

Ed Oscuro · Post by **Ed Oscuro** » Mon Oct 21, 2013 2:10 am

For the "I only buys Japaneses, pleases" guy, remember that there are differences between TC and KT. Play MAME and take note of the checkpoints.

I don't regret my KT board at all, though.

szycag · Post by **szycag** » Mon Oct 21, 2013 3:10 am

Noooooo! Dangun Feveron

cicada88 · Post by **cicada88** » Mon Oct 21, 2013 4:12 am

szycag wrote:Noooooo! Dangun Feveron

sorry i just don't think this could be the right answer for me yet

chempop · Post by **chempop** » Mon Oct 21, 2013 7:02 am

ESPrade is a great choice! No ports, great art/design, decent challenge but not too silly, and solid bang for buck (less than half what ketsui costs and just as fun imho).

Drachenherz · Post by **Drachenherz** » Mon Oct 21, 2013 8:24 am

Very shameless plug... *arrhem*...

http://shmups.system11.org/viewtopic.php?f=4&t=47800

shmuppyLove · Post by **shmuppyLove** » Mon Oct 21, 2013 12:17 pm

cicada88 wrote:Thanks for the help and suggestions everyone.

It looks like I will be going with ESP Ra De

Yisssssss that's a good choice. I mean, just read this:

Wikipedia wrote:J-B 5th

A 14-year-old psychic assassin, trained since early childhood as part of a secret psychic squad of the Russian government. Fearing the expansion of the Yaksa's influence, he is clandestinely smuggled to Japan with the intent of eliminating every high profile member of the organisation, up to Garra Ono herself. His code name for the mission is Black Peter Pan ...

BLACK PETER PAN BITCHES BETTER RECOGNIZE

shmups.system11.org

Roommate's Lathe is finally gone, which PCBs should I buy

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu

Re: Roommate's Lathe is finally gone, which PCBs should I bu