XRGB-3

The place for all discussion on gaming hardware
User avatar
brownvim
Posts: 291
Joined: Fri Oct 28, 2011 8:24 pm
Location: Birmingham, England

Re: XRGB-3

Post by brownvim »

Beaps wrote:So it's just a matter of slicing the jap plug on the end. Does Maplin's not sell the right end plug?
You can't use the Japanese plug unless you use a step down converter.

Instead just buy the power supply I linked you to and also buy that tip in the previous post if you don't want to wreck the existing power supply.
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Just ordered the parts, cheers dude
Sixfortyfive
Posts: 212
Joined: Mon Sep 17, 2007 6:31 am

Re: XRGB-3

Post by Sixfortyfive »

Do you need the remote to access any of the functions on the XRGB-3? I don't mind fiddling around with the box itself, so I'm wondering if there are any drawbacks I should know of when picking up one without a remote.
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

No. All inputs have quick select buttons on the machine itself and the menu is fully operatable as well.
Sixfortyfive
Posts: 212
Joined: Mon Sep 17, 2007 6:31 am

Re: XRGB-3

Post by Sixfortyfive »

$250 well spent, then. Thanks.

I guess my next question would be where I could find the most recent firmware. Junkerhq wiki?
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

last english FW version: http://www.micomsoft.co.jp/xrgb3_update ... 110506.exe

And this is the B1 FW update (scanline mode) if it's not already present on the hardware: http://www.micomsoft.co.jp/xrgb3_update ... _v1_00.exe
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Parts turned up to make the UK power supply. When I lob the end off the cable. How do I know which one goes where on the new end?

Hope that makes sense
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

How do I know which one goes where on the new end?
not without using a multimeter to test which wire's positive and which one's negative.
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Got a multimeter, but still how do I check?
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

On the original PSU you should be able to see if + (pos) is supposed in the center or on the outside. I guess center.

If you put the red wire of the multimeter to the center and the black one to the outside and you get a positive (+) reading, you're ok.
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Thanks for this, do I need to do this when it's plugged in and powered on?
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

you have to power the psu, but of course you don't have to connect it to the XRGB.
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Ok just so I am clear.

- I lob the end off the current one
- solder the two wires to the new end
- plug it in, power on
- touch the inner of the new end with my red stick of the multimeter & the outer with the black
- then I should have a positive reading
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

exactly. And if you get a negative reading you have to reverse the two wires before using it with your XRGB.

You can also measure for +/- before soldering on the new plug. And just measure the continuity on the plug you chopped off to see which wire is connected to the center pin. Either way is fine.....
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Great, thanks

What I think I will do is...

Cut one of the two wires, check continuity to see if it is connected to the inner or outer of the end plug, and then solder it to the new plugs inner/outer if that makes sense?
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

whatever you do, just do it. It's not exactly rocket science :mrgreen:
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

I know, I know, just don't wanna blow the thing up even before I get to use it :lol:
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Job done & looking sweet.

How do I flash the firmware to change it to English, The links on the XRGB-3 site are dead.

Is there an English guide I can follow?
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

I posted the links to the most recent english FW files above. Just scroll up a bit. This should include the english updater as well. On my page you can find a step by step guide on how to use the japanese updater.

Before trying to install the B1 FW, check it if it's not installed already (change to B1), check if you get scanlines or not. B0 controls the language. There's just one version of the B1 FW.
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Cheers dude :D

Also, would you know where I can pick up a Jap VGA to Component cable?
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

You mean d-terminal ? Solaris.
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Any idea what page it on to flash it to English, I cant find it :cry:
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

I don't follow. http://shmups.system11.org/viewtopic.ph ... 48#p980948
Download the update. Install. Update. Any problem ?
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

I downloaded the update tool but its all in Jap, I don't know what I am clicking on
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

Use the tutorial on my page. Just scroll down to the XRGB-3 section. Can't miss it.
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

How did I miss that, I am on that page as well :oops:
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

If you can't find the tutorial on my page, it's right above the Framemeister review, at about 40% down the page. http://retrogaming.hazard-city.de/
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

Balls, your link for (current version is 2.12) is dead, also the one on their forum is dead

CPU Ver 2.21aへのアップデートを行うと、2.12以前のインストーラ付属のXRGB-3 Update Tool Ver 1.20では書込みできなくなります。
(キャプチャー機能の追加により、USBの転送プロトコルを変更したためです。)
2.21以降へのアップデート後、以前のファームウェアに戻す場合、xrgb3_update_setup_v2_12a.exeをインストールし、アップデートファイル(xrgb3full_v2_12.x3b)でファームアップしてください。
User avatar
Fudoh
Posts: 13015
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: XRGB-3

Post by Fudoh »

you're not the most tech-savy guy, right ?

I know that the links are dead and that's why I posted new ones in this thread - on this very page.
Beaps
Posts: 300
Joined: Sat Jun 20, 2009 8:03 pm
Location: UK - Essex

Re: XRGB-3

Post by Beaps »

hehe no, how did you guess :lol:
Post Reply