Just a question if my XRGB-3 function is normal. If I use it in B1 Mode, connected by VGA to a LCD I get a perfect picture. If I connect the DVI (Digital out) to the TV or any
other LDC, the VGA signal collapes and the screen turns black. Do I really always have to disconnect the DVI Plug on the back of my TV to use B1 Mode for enjoying Scanlines or is something broken ?
XRGB-3 in B1 Mode - Does it work as it should ?`
-
Xenogears
- Posts: 5
- Joined: Tue Nov 05, 2013 8:14 pm
- Location: Germany
-
SGGG2
- Posts: 826
- Joined: Thu Dec 31, 2009 1:03 am
- Location: East Coast, US
Re: XRGB-3 in B1 Mode - Does it work as it should ?`
B1 (lindoubling mode) only works over VGA, and yes, you can't have cables in both outputs or the XRGB won't work. Most TV's aren't compatible with the 1080p signal in B0, and lots of displays have problems with B1 as well. Although it can work with TV's, the XRGB-3's designed to be used with computer monitors.
-
Xenogears
- Posts: 5
- Joined: Tue Nov 05, 2013 8:14 pm
- Location: Germany
Re: XRGB-3 in B1 Mode - Does it work as it should ?`
_> Thank you very much for this information. I already feard a malfunction of my device.SGGG2 wrote:B1 (lindoubling mode) only works over VGA, and yes, you can't have cables in both outputs or the XRGB won't work. Most TV's aren't compatible with the 1080p signal in B0, and lots of displays have problems with B1 as well. Although it can work with TV's, the XRGB-3's designed to be used with computer monitors.