Supergun PSU - need a Sanwa SWN-7F PSU

[IronGiant]

I need to get hold of a PSU for a Supergun (the existing PSU is extremely fried!) - model number of the existing PSU is a Sanwa SWN-7F

It looks like this:

http://www.tops-game.jp/part/img3/swn-7f.jpg

Can anyone recommend a UK supplier of that model or a suitable supplier of a UK equivalent (I'd like one that has the same or better specs with the same connections in the same places to avoid any re-wiring, same footprint for screws to make it easier to fit, etc).

Note: the PSU is in a Supergun which also needs a stepdown converter.

Ta.

[kowal]

meanwell
RT-125A
RQ-125B
T-120A

and best option
suzo Prima Power 104W
ID: 42PP0606

[IronGiant]

Great, thanks.

Any ideas of a UK supplier for any of them?

[kowal]

both may subsidiaries in the UK
http://www.suzo.co.uk/

meanwell PS sell every major electronics company in every country...

[IronGiant]

Thanks.

[IronGiant]

Well, I'm having a pig of a job finding a suitable supply - thanks for your recommendations kowal but neither of the recommended PSUs will fit inside this particular Supergun due to the locations of the mounting holes (and I don't want to have to drill more holes in the Supergun).

The only PSU that will fit perfectly is the Meanwell T-60A - here's the spec sheet:

http://www.google.co.uk/url?sa=t&rct=j& ... 9444,d.d2k

(sorry about the long Google link).

The only problem with that one is that the current rating for +5 is only 5A which is a little low.

[kowal]

is a japan supergun?

AV or Blast city?

[IronGiant]

It's a Blastcity:

http://www.mak-jp.com/images/ctr_box/boadmaster.jpg

[kowal]

Dont use this meanwell 5A it will overheat
suzo is more better.

I have this mak
is easy to mount new power suplly
drill new hole on bottom

and you still can made new hole in PS case on bottom
PS PCB is placed inside 2mm above the casing

[IronGiant]

Thanks, but I was hoping to avoid drilling any extra holes.