Oh, Awesome!emphatic wrote:No, that's the whole point of Phoenix roms.mesh control wrote:Super-duper dumb question: I own a phoenixed CPS2 board, will it's battery suicide like a normal CPS2?
Too bad there is no highscore save mod. -_-'
Oh, Awesome!emphatic wrote:No, that's the whole point of Phoenix roms.mesh control wrote:Super-duper dumb question: I own a phoenixed CPS2 board, will it's battery suicide like a normal CPS2?
in that case how about 720p to 480p, would that work without producing too much lag or screwing the image (quality)?Fudoh wrote:any better video processor can do this, but the framerate conversion from 50Hz to 60Hz isn't very nice for videogames.
depends on your sources. An iScan HD+ should do the job for about 100 EUR.if that's no problem it'd be great if i could get a recommendation for a device for specifically this purpose
what i want to hook up is a ps3 which uses 567p instead of 480p. forgot to mention that as well, sorry.Fudoh wrote:Where do you want to add a HDFury ?
depends on your sources. An iScan HD+ should do the job for about 100 EUR.if that's no problem it'd be great if i could get a recommendation for a device for specifically this purpose
yeah. the 720p question was about the same thing, since your remark about hz conversion made me wonder if it could work if i used the ps3s 720p output.Fudoh wrote:wasn't this the initial question ? 576p50 into the VP and 480p60 from the VP to the monitor.
though about the dvi input, dvi-i onnector it says it processes 720p.-Two component Video Inputs: (YPbPr or RGB/S) process 480i, 480p, 576i, 576p signals; pass-through 720p and 1080i High Definition signals
i don't own a hd tv and a pgm + vp seems to be a better investment for me since i care a lot about picture quality and contrast. i also sit only about 2 to 3 meters away from the screen when playing (small room), so i don't really benefit from the larger hd picture anyways.May I ask why you want to connect a PS3 to a PGM anyway ?
did you mistype this ? I sit 1.3m from a 52" model for gaming. I would chose a 65" for 3mi also sit only about 2 to 3 meters away from the screen when playing (small room), so i don't really benefit from the larger hd picture anyways.
Awesome, thanks! My CRT has component inputs, but to be honest, I'm not sure if it can run 480p (I know very little about tvs, trying to learn as much as I can from this thread and the hardware section)rugdoctor wrote:Get coinops3 and should run the games. Make sure you try a different dump if it does not work the first time. So far I have tried Dangun Feveron
Esp RA DE, Progear and Bakraid (maybe striker) They all work great, but expect some frameskipping when the action gets a bit overwhelming....playable, but you will notice it. All arcade emulation on the xbox1 have tate function...hell, you can run hori games in tate if you want (plus some added scaling chucked in) Run the emulation in 480p (get component cables) if your crt can handle that to get a sharper image and no flickering otherwise live with 480i via scart.