SCART Switch/Splitter Recommendation
SCART Switch/Splitter Recommendation
I need a recommendation for a SCART Switch/Splitter that has 4-6 ports (input). Bought a cheap one on ebay from Hong Kong and a $40 from US, and both suck. The cheap one was a total POS, and the $40 dropped my brightness and color down about 50%. I need no noticable loss in video quality. What are you running?
Re: SCART Switch/Splitter Recommendation
Some discussion about the same problem here.
My main scart switcher is a Trilogy 1 (five scart inputs, four are RGB in). Unfortunately that one's rather difficult to find nowadays. To accommodate all my older consoles I also use a Hama-brand switcher (this one) and I'm happy with that one as well.
My main scart switcher is a Trilogy 1 (five scart inputs, four are RGB in). Unfortunately that one's rather difficult to find nowadays. To accommodate all my older consoles I also use a Hama-brand switcher (this one) and I'm happy with that one as well.
No matter how good a game is, somebody will always hate it. No matter how bad a game is, somebody will always love it.
My videos
My videos
-
- Posts: 603
- Joined: Sat Aug 15, 2009 9:13 pm
- Location: Europe
Re: SCART Switch/Splitter Recommendation
http://www.wolfsoft.de/shop/product_inf ... alter-rgb-(schwarz
EDIT: Oh I'm stupid, it's been posted.
EDIT: Oh I'm stupid, it's been posted.
Re: SCART Switch/Splitter Recommendation
That one only ships to germany/austria =/
Re: SCART Switch/Splitter Recommendation
Will these work for Japanese 21 pin RGB or ONLY with the Euro scart pin out?
Damn Tim, you know there are quite a few Americans out there who still lives in tents due to this shitty economy, and you're dropping loads on a single game which only last 20 min. Do you think it's fair? How much did you spend this time?
-
Sinneslöschen
- Posts: 66
- Joined: Thu Feb 21, 2008 10:16 am
- Location: South Germany
Re: SCART Switch/Splitter Recommendation
I use this one:
http://www.amazon.de/Playstation-Scartb ... 71&sr=8-18
...and avoid this one:
http://www.amazon.de/Hama-Umschaltpult- ... 674&sr=8-2
http://www.amazon.de/Playstation-Scartb ... 71&sr=8-18
...and avoid this one:
http://www.amazon.de/Hama-Umschaltpult- ... 674&sr=8-2
Re: SCART Switch/Splitter Recommendation
The second one can be fine, there are just so many that look like that, from a million different sellers, that there is the chance for a dud.
I bought this one the other day: http://www.ebay.com/itm/5-way-Manual-SC ... 2564c518ee
terrible! the video signals seem to be coming through regardless of whether the switch is turned on or off. I haven't had the time as of late, but I have it open and am trying to trace the lines out to see if its just someone who soldered some wires in the wrong spot or a fundamental problem with the pcb.
I bought this one the other day: http://www.ebay.com/itm/5-way-Manual-SC ... 2564c518ee
terrible! the video signals seem to be coming through regardless of whether the switch is turned on or off. I haven't had the time as of late, but I have it open and am trying to trace the lines out to see if its just someone who soldered some wires in the wrong spot or a fundamental problem with the pcb.
Re: SCART Switch/Splitter Recommendation
Do you see any noticable loss of video quality/brightness/color with this unit?Sinneslöschen wrote:I use this one:
http://www.amazon.de/Playstation-Scartb ... 71&sr=8-18
-
Sinneslöschen
- Posts: 66
- Joined: Thu Feb 21, 2008 10:16 am
- Location: South Germany
Re: SCART Switch/Splitter Recommendation
Did not notice any loss with that unit.
Re: SCART Switch/Splitter Recommendation
Hello,
I have the Shinybow SCART Matrix 6:2 Switch. It works great. Here is a link to the product's PDF:
www.shinybow.com.tw/products/pdf/12447065830.pdf
It works very well. The only catch is that its only available from Europe, however, you can have Shinybow USA import it for you. It will take about 3 weeks to reach you and cost about $170, including shipping. (I think)
Give them a call and they will help you out. Here is their contact page:
http://www.shinybowusa.com/shop/contact ... 60195ae657
I have the Shinybow SCART Matrix 6:2 Switch. It works great. Here is a link to the product's PDF:
www.shinybow.com.tw/products/pdf/12447065830.pdf
It works very well. The only catch is that its only available from Europe, however, you can have Shinybow USA import it for you. It will take about 3 weeks to reach you and cost about $170, including shipping. (I think)
Give them a call and they will help you out. Here is their contact page:
http://www.shinybowusa.com/shop/contact ... 60195ae657
Re: SCART Switch/Splitter Recommendation
Ghegs wrote:Some discussion about the same problem here.
My main scart switcher is a Trilogy 1 (five scart inputs, four are RGB in). Unfortunately that one's rather difficult to find nowadays. To accommodate all my older consoles I also use a Hama-brand switcher (this one) and I'm happy with that one as well.
I'm trying to get that hama scart switch, and am having problems with finding someone who will ship to the US. None of the ebay sellers seem to ship to the US. Amazon does, but it seems to cost more to ship than it the product itself (is 30 euro for shipping to the US normal?)
-
angryswede
- Posts: 58
- Joined: Sun Dec 19, 2010 11:25 pm
Re: SCART Switch/Splitter Recommendation
I'm curious about this switch, but I can't find anything on their site. Where (and when) in Europe did you find it? The distributor lists for EU is empty, and the only other mention of EU is a banner for a Dutch trade show.
philexile wrote:Hello,
I have the Shinybow SCART Matrix 6:2 Switch. It works great. Here is a link to the product's PDF:
http://www.shinybow.com.tw/products/pdf/12447065830.pdf
It works very well. The only catch is that its only available from Europe, however, you can have Shinybow USA import it for you. It will take about 3 weeks to reach you and cost about $170, including shipping. (I think)
Give them a call and they will help you out. Here is their contact page:
http://www.shinybowusa.com/shop/contact ... 60195ae657
clean gloves, dirty hands.
Re: SCART Switch/Splitter Recommendation
Amazon UK still list them, not sure if they ship to the EU or not though http://www.amazon.co.uk/Scart-Matrix-Sw ... 024&sr=8-1
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
-
angryswede
- Posts: 58
- Joined: Sun Dec 19, 2010 11:25 pm
Re: SCART Switch/Splitter Recommendation
Thanks! Do any one know what the original rrp on this unit was? From £162 to £255 is quite a difference...BuckoA51 wrote:Amazon UK still list them, not sure if they ship to the EU or not though http://www.amazon.co.uk/Scart-Matrix-Sw ... 024&sr=8-1
clean gloves, dirty hands.
Re: SCART Switch/Splitter Recommendation
I got those hama scart switches from amazon.de today. Damn they are solid! They only offer express shipping though, so it ended up costing me 80 euro for two (25 euro each, I guess it removed VAT after putting it in the cart) and 30 for shipping.
Re: SCART Switch/Splitter Recommendation
What brand SCART cables are you using? Do you see any loss in quality?Zapf wrote:I got those hama scart switches from amazon.de today. Damn they are solid! They only offer express shipping though, so it ended up costing me 80 euro for two (25 euro each, I guess it removed VAT after putting it in the cart) and 30 for shipping.
Re: SCART Switch/Splitter Recommendation
All my console cables are custom from retro console accessories (formerly pcenginesales), except for the NES one. My male/male one is that goofy thick sony scart cable you can get on ebay. It doesn't look any different compared to directly hooking it up to the xrgb (via scart -> 21 pin adapter). No difference when multiple inputs are turned on.
Re: SCART Switch/Splitter Recommendation
The Hama switches are solid, despite what Sinneslöschen said I could not find any faults with the AV-100S either.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: SCART Switch/Splitter Recommendation
My set-up/expectations has grown quite a bit since then.Ghegs wrote:Some discussion about the same problem here.
My main scart switcher is a Trilogy 1 (five scart inputs, four are RGB in). Unfortunately that one's rather difficult to find nowadays. To accommodate all my older consoles I also use a Hama-brand switcher (this one) and I'm happy with that one as well.
Currently I have two black switchers that does 5 inputs, and the silver one that holds four, I've had them hooked up for about 2 years. These switchers dim the picture a little bit. Not recommended. So I wanted to invest in 6 x 2 A/V SCART matrix switcher and one of those Hama switches.
I am using about 16 consoles total. All RGB enabled. Gonna be attaching 9 of them to the switchers. The point switcher, the 6 x 2 SCART Matrix can hold 5 while the Hama switch takes the rest. The killer is because my financials are extremly limited can't afford a third competent switch. So I'll have to sacrifice the PC Engine and the NeoCD >_<* luckily the Xbox, X360, & GC can go to Component Video. I wish more people would acknowledge the possibilities of SCART leads in the States so retailers & online venues can sell these things at more affortable prices. Not only that but take us multi-console owners, who are housing a massive lot, into consideration. There's like no consideration at all. Can be frusterating sometimes.
My only concern if I buy these aformentioned switches and chain them together. Are there any electrical problems to report? Would attaching the Shinybow with the Hana blow my SCART cable? My understanding is some switchboxes can be hazardous.
MY SALES THREAD: https://shmups.system11.org/viewtopic.php?f=4&t=71536
Re: SCART Switch/Splitter Recommendation
Yes! It will surely catch fire and disintegrate lol... no seriously, its perfectly fine.Would attaching the Shinybow with the Hana blow my SCART cable?
When I told you on PM that some switches were "hazardous" I meant the cheap ones which don't isolate the SCART sockets from each other. This can lead to voltage from one system leaking into another, in one instance enough to turn on my SNES without it even being plugged into the wall. Even so we're talking 9 volts or so, so it's not going to burn down your house, but it's not exactly an ideal thing to do to your vintage consoles.
However, you won't get such problems with the Hama switches I've tested and I'd be astounded if you did with the Shinybow.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: SCART Switch/Splitter Recommendation
Oh noes!BuckoA51 wrote:Yes! It will surely catch fire and disintegrate lol
You heard the man people. This seems the ideal combination!BuckoA51 wrote:When I told you on PM that some switches were "hazardous" I meant the cheap ones which don't isolate the SCART sockets from each other. This can lead to voltage from one system leaking into another, in one instance enough to turn on my SNES without it even being plugged into the wall. Even so we're talking 9 volts or so, so it's not going to burn down your house, but it's not exactly an ideal thing to do to your vintage consoles.
However, you won't get such problems with the Hama switches I've tested and I'd be astounded if you did with the Shinybow.
MY SALES THREAD: https://shmups.system11.org/viewtopic.php?f=4&t=71536
Re: SCART Switch/Splitter Recommendation
I own a cheap SCART Block that did the exact thing above(turn on consoles), so I never used it. I have been aching for more scart switchers(I have the madcatz rgb one, wish they'd make more).BuckoA51 wrote:When I told you on PM that some switches were "hazardous" I meant the cheap ones which don't isolate the SCART sockets from each other. This can lead to voltage from one system leaking into another, in one instance enough to turn on my SNES without it even being plugged into the wall. Even so we're talking 9 volts or so, so it's not going to burn down your house, but it's not exactly an ideal thing to do to your vintage consoles.
I thought about what I could do to use the SCART block. I went ahead and did some checking on where the voltage was coming from the consoles and the main stuff is from pin 8(aspect up) and pin 16(blanking). Now from eviltim's console scart pinouts I saw that pins 8 and 16 are connected on certain consoles(with resistor to step down voltage)(NOTE:this is for NTSC, PAL is different). I went ahead and opened the scart block and cut all the traces between pin 8 of the scart plugs. I plugged it into the xrgb(with an adaptor of course) and all works well. I'm not sure if I need to cut the traces on pin 16 as the voltage passed across is less and does not turn anything on. Also when using a block I make sure to only turn on one console at the time.
NOTE: this only works on the XRGB as it does not need to be told to accept RGB. A regular SCART TV needs that voltage to change from composite to RGB.
Anybody else try this?
Current Setup:
720P------------------------v
240P->XRGB-3->Edge->4x2 matrix->DLP HDTV
480i/P->YPbPrselect-^ . . ^ . . V-->hdmi2vga->Super Emotia->Tate CRT SDTV
PC->vga2hdmi-------------^
720P------------------------v
240P->XRGB-3->Edge->4x2 matrix->DLP HDTV
480i/P->YPbPrselect-^ . . ^ . . V-->hdmi2vga->Super Emotia->Tate CRT SDTV
PC->vga2hdmi-------------^
Re: SCART Switch/Splitter Recommendation
It's better than nothing but in that setup you still have the problem that components in one SCART can affect another, for instance if there are caps in a SCART cable further down the chain, perhaps to reduce the brightness on one console, they can then affect the brightness of a console left in another SCART socket.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: SCART Switch/Splitter Recommendation
I didn't notice the brightness change that bad but you're right. This is more of a band aid until a proper SCART switch can be picked up. The madcatz RGB one is perfect, I really wish I could find another one(or two).BuckoA51 wrote:It's better than nothing but in that setup you still have the problem that components in one SCART can affect another, for instance if there are caps in a SCART cable further down the chain, perhaps to reduce the brightness on one console, they can then affect the brightness of a console left in another SCART socket.
Current Setup:
720P------------------------v
240P->XRGB-3->Edge->4x2 matrix->DLP HDTV
480i/P->YPbPrselect-^ . . ^ . . V-->hdmi2vga->Super Emotia->Tate CRT SDTV
PC->vga2hdmi-------------^
720P------------------------v
240P->XRGB-3->Edge->4x2 matrix->DLP HDTV
480i/P->YPbPrselect-^ . . ^ . . V-->hdmi2vga->Super Emotia->Tate CRT SDTV
PC->vga2hdmi-------------^
Re: SCART Switch/Splitter Recommendation
Yeah it depends on the SCARTs I think, the brightness might not be affected by, say, the Saturn's SCART since its just plain wires. a SNES SCART might have much more of an effect since its usually capped.
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: SCART Switch/Splitter Recommendation
I bought the Hama switchbox. It's awesome, no issues. Expensive to import from Germany, but worth it. I just wish I had another.
Re: SCART Switch/Splitter Recommendation
Where did you get it from? On what website?daskrabs wrote:I bought the Hama switchbox. It's awesome, no issues. Expensive to import from Germany, but worth it. I just wish I had another.
MY SALES THREAD: https://shmups.system11.org/viewtopic.php?f=4&t=71536
Re: SCART Switch/Splitter Recommendation
Do you know if this store ships to the US? When I proceeded to checkout everything was in a different language.
MY SALES THREAD: https://shmups.system11.org/viewtopic.php?f=4&t=71536
Re: SCART Switch/Splitter Recommendation
Yes, I'm in the US. ~$85 total.