Can Anyone Help Me Fix My ESPrade PCB ?
-
Trevor spencer
- Posts: 1032
- Joined: Sat Jan 29, 2005 1:17 pm
- Location: UK
- Contact:
Can Anyone Help Me Fix My ESPrade PCB ?
Powered this up this morning to find this nasty mess of glitches , not impressed
Game plays fine its just the colour mash , so is it poss to get it repaired ?
Not sure it these caps could be causing it , there quite squished
Please Help , I like this game
Thanks
Game plays fine its just the colour mash , so is it poss to get it repaired ?
Not sure it these caps could be causing it , there quite squished
Please Help , I like this game
Thanks
Check out my YouTube Channel
YouTube
YouTube
-
mastercello
- Posts: 353
- Joined: Thu Mar 15, 2007 12:24 pm
- Location: Switzerland
Re: Can Anyone Help Me Fix My ESPrade PCB ?
Dont think the problem are the capacitors...as they are for sound.
I guess you have a problem with one of the larger SMD chips, loose solder points on the legs.
You could try pressing them softly down and see if it affects the problem
I guess you have a problem with one of the larger SMD chips, loose solder points on the legs.
You could try pressing them softly down and see if it affects the problem
-
Trevor spencer
- Posts: 1032
- Joined: Sat Jan 29, 2005 1:17 pm
- Location: UK
- Contact:
Re: Can Anyone Help Me Fix My ESPrade PCB ?
mastercello wrote:Dont think the problem are the capacitors...as they are for sound.
I guess you have a problem with one of the larger SMD chips, loose solder points on the legs.
You could try pressing them softly down and see if it affects the problem
Hmmm ok ill give that a try , thanks
Check out my YouTube Channel
YouTube
YouTube
-
Trevor spencer
- Posts: 1032
- Joined: Sat Jan 29, 2005 1:17 pm
- Location: UK
- Contact:
Re: Can Anyone Help Me Fix My ESPrade PCB ?
just tried lifting off all the detachable chips and gave them a good clean , its still the same
Check out my YouTube Channel
YouTube
YouTube
-
mastercello
- Posts: 353
- Joined: Thu Mar 15, 2007 12:24 pm
- Location: Switzerland
Re: Can Anyone Help Me Fix My ESPrade PCB ?
Dont lift them...try to gentle press them down while the game is running.
So you can see wich chip you might have to reflow.
The big SMD chips...not the EPROMS
So you can see wich chip you might have to reflow.
The big SMD chips...not the EPROMS
Last edited by mastercello on Mon May 03, 2010 11:27 am, edited 1 time in total.
-
charlie chong
- Posts: 1517
- Joined: Fri Dec 08, 2006 12:19 pm
- Location: borders
Re: Can Anyone Help Me Fix My ESPrade PCB ?
nah i doubt it's the eproms.. look for big surface mounted chips on the board and press down on them to see if it fixes the problem.
this has happened to quite a few guwanges before due to the boards bending slightly and a leg or 2 becomes detached off a chip.
this has happened to quite a few guwanges before due to the boards bending slightly and a leg or 2 becomes detached off a chip.
SLAG OFF KETSUI I SLAG OFF YOR MUM
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
-
Trevor spencer
- Posts: 1032
- Joined: Sat Jan 29, 2005 1:17 pm
- Location: UK
- Contact:
Re: Can Anyone Help Me Fix My ESPrade PCB ?
Ive tried pressing down on every big chip , dosnt do anything different also all the solder points under the board look fine
Check out my YouTube Channel
YouTube
YouTube
-
Trevor spencer
- Posts: 1032
- Joined: Sat Jan 29, 2005 1:17 pm
- Location: UK
- Contact:
Re: Can Anyone Help Me Fix My ESPrade PCB ?
Ive just tried adjusting voltage on the off chance , no luck
If no one can repair this i might ebay it as faulty , damn shame really
If no one can repair this i might ebay it as faulty , damn shame really
Check out my YouTube Channel
YouTube
YouTube
-
charlie chong
- Posts: 1517
- Joined: Fri Dec 08, 2006 12:19 pm
- Location: borders
Re: Can Anyone Help Me Fix My ESPrade PCB ?
speak to member r-typer off this board.. he might be able to fix it for you
SLAG OFF KETSUI I SLAG OFF YOR MUM
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
-
Trevor spencer
- Posts: 1032
- Joined: Sat Jan 29, 2005 1:17 pm
- Location: UK
- Contact:
Re: Can Anyone Help Me Fix My ESPrade PCB ?
Ok cheerscharlie chong wrote:speak to member r-typer off this board.. he might be able to fix it for you
Check out my YouTube Channel
YouTube
YouTube
Re: Can Anyone Help Me Fix My ESPrade PCB ?
PM received and replied to - thanks for the recommendation charlie chong.
Formerly known here as R-Typer
Arcade game board repairer (known as 'Irongiant' and 'Vectorglow' on other arcade forums)
Arcade game board repairer (known as 'Irongiant' and 'Vectorglow' on other arcade forums)