SPI "Hardware Error 81"

[robivy64]

Long story short:

I changed the game on a Seibu SPI board. During the reflashing it freezes.

I reboot and get "Hardware Error 81"

I'm pretty sure the motherboard is fucked since the flash data is corrupted, I just need confirmation :p.

[Alien Soldier]

Did you swith the JP071 jumper back ?

Anyway, If there was a freeze or if the power was shutted down during the countdown then yes, your mobo is most likely dead.

[rtw]

Long story short:

I changed the game on a Seibu SPI board. During the reflashing it freezes.

I reboot and get "Hardware Error 81"

I'm pretty sure the motherboard is fucked since the flash data is corrupted, I just need confirmation :p.

What happens if you try it with another cart ?

Which hardware is this on ?

http://www.arcadepapers.com/APPA_Info_S ... rdware.htm

rtw

[robivy64]

Swapping the game with or without the jumper shorted doesnt make any difference. It is the version 2.0 motherboard.

[robivy64]

Also rtw, just reading up on your SPI board info page:

I can confirm that a 33 MHz 386 is not required to run Raiden Fighters Jet. I have updated a motherboard to Raiden Fighters Jet with no problems in the past. All SPI boards I have seen have 25 MHz processors on them (Intel 386 DX and AMD Am386DX).

I have a Raiden Fighters Jet 2000 board on the way so that should be interesting.

[rtw]

Also rtw, just reading up on your SPI board info page:

I can confirm that a 33 MHz 386 is not required to run Raiden Fighters Jet. I have updated a motherboard to Raiden Fighters Jet with no problems in the past. All SPI boards I have seen have 25 MHz processors on them (Intel 386 DX and AMD Am386DX).

I have a Raiden Fighters Jet 2000 board on the way so that should be interesting.

It's actually The Sheeps pages, but I have contributed

It's correct that there was a misunderstanding with the Raiden Fighters Jet that sort of stuck. Maybe you can PM The Sheep and ask him to remove this erroneous information ?

rtw