I want to replace the JAMMA PSU in my cab since I just blew up my step down transformer and hit a snag.. is the Nanao MS9 dual voltage or would I need a replacment chassis?
I actually just went digging through a box with the guts of a T2 cab in it.. I found a Hantarex US 250 PSU. It says it has a 135v monitor output, would this be too much for my Nanao?
You can have a 10000w PSU if you want, the device your powering will just take what it needs. Its harmless having the wattage over what you need, its very dangerous having it lower than you need.
This industry has become 2 dimensional as it transcended into a 3D world.
one of my AWSD power supplies has died , bloody wei-ya.
I am going to put a standard jamma psu in and lose JVS support, but thats not a big deal, the chassis is 110 only though so I think I'll run it on 110 and keep the stepdown.