That's the expensive solution to cable insecurity. Buy new cables!kitty666cats wrote:thefoo.83 has great cables that aren't a super tight fit, consolegoods.co.uk cables are pretty good for the price too (sync on composite video, but hey the gscart-switch is giving you RGBS anyway). Kinda thin but no screwy audio!Icelvlan wrote:Does anyone have any tips in scart connectors not getting loose easily in gscart switches?
Most of my cables are retro access. and I find whenever I move stuff slightly I have to reconnect the cables.
Insurrection Industries cables are a good fit in damn near every connector I've ever encountered.
gscartsw / gscartsw_lite / gcompsw switches support thread
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Lol ya not replacing these cables.
-
kitty666cats
- Posts: 1274
- Joined: Tue Nov 05, 2019 2:03 am
- Location: Massachusetts, USA
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
I sold my 'fancy' cables for pretty good $ on eBay recently and just started rocking cheaper cables that I knew were reputable from past experience, heh. Everything's going into a sync cleaner right before my monitor anyway/my console cables are purposely quite short. But yeah, if one has already took the plunge on numerous 50 dollar specialty cables, replacing them doesn't sound too fun!ldeveraux wrote:That's the expensive solution to cable insecurity. Buy new cables!kitty666cats wrote:thefoo.83 has great cables that aren't a super tight fit, consolegoods.co.uk cables are pretty good for the price too (sync on composite video, but hey the gscart-switch is giving you RGBS anyway). Kinda thin but no screwy audio!Icelvlan wrote:Does anyone have any tips in scart connectors not getting loose easily in gscart switches?
Most of my cables are retro access. and I find whenever I move stuff slightly I have to reconnect the cables.
Insurrection Industries cables are a good fit in damn near every connector I've ever encountered.
Maybe there's some sort of light adhesive spray Icelvlan could look into...?
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Does the gscartsw support either :
1. Pi2SCART http://pi2jamma.info/pi2scart
or
2. MiSTer https://github.com/MiSTer-devel/Main_MiSTer/wiki using a retroaccess VGA to SCART cable (https://retro-access.com/products/mister-io-scart)
I'm afraid to try them given the issues with superguns ; but presumably these are different? Thanks in advance!
1. Pi2SCART http://pi2jamma.info/pi2scart
or
2. MiSTer https://github.com/MiSTer-devel/Main_MiSTer/wiki using a retroaccess VGA to SCART cable (https://retro-access.com/products/mister-io-scart)
I'm afraid to try them given the issues with superguns ; but presumably these are different? Thanks in advance!
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
I tried the other raspberry pi scart solution, forgot the name but it was all good.
This is more a question to Bob from retrorgb, I'm not familiar with mister.seldinger wrote: 2. MiSTer https://github.com/MiSTer-devel/Main_MiSTer/wiki using a retroaccess VGA to SCART cable (https://retro-access.com/products/mister-io-scart)
I'm afraid to try them given the issues with superguns ; but presumably these are different? Thanks in advance!
-
kitty666cats
- Posts: 1274
- Joined: Tue Nov 05, 2019 2:03 am
- Location: Massachusetts, USA
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
That would be RGB-Pi, that one's 12V over SCART. Never tried Pi2SCART / unsure of whether it's 5 or 12. I'm willing to bet it's probably even 'safer', the RGB-Pi cable has given people problems RE: blowin' stuff out & I have never heard of Pi2SCART doing so.superg wrote:I tried the other raspberry pi scart solution, forgot the name but it was all good.
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Yes, it was RGB-Pi. 12V? I don't think RGBS lines were that. That was connected to raspberry pi GPIO bus, I don't think that can do 12V unless there is some DC-DC. RGB-Pi even worked on my gscartsw_lite which had -2.5V..2.5V multiplexer range so it's ruling out 5V on RGBS lines.kitty666cats wrote:That would be RGB-Pi, that one's 12V over SCART. Never tried Pi2SCART / unsure of whether it's 5 or 12. I'm willing to bet it's probably even 'safer', the RGB-Pi cable has given people problems RE: blowin' stuff out & I have never heard of Pi2SCART doing so.superg wrote:I tried the other raspberry pi scart solution, forgot the name but it was all good.
Of course it can be higher voltage on SCART pin 8 / pin 16 but these are disconnected on gscartsw.
-
kitty666cats
- Posts: 1274
- Joined: Tue Nov 05, 2019 2:03 am
- Location: Massachusetts, USA
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
"Hardware specificationssuperg wrote:Yes, it was RGB-Pi. 12V? I don't think RGBS lines were that. That was connected to raspberry pi GPIO bus, I don't think that can do 12V unless there is some DC-DC. RGB-Pi even worked on my gscartsw_lite which had -2.5V..2.5V multiplexer range so it's ruling out 5V on RGBS lines.
Of course it can be higher voltage on SCART pin 8 / pin 16 but these are disconnected on gscartsw.
New feature auto-switching to AV channel on 4:3 with 12v stepup, 18 Bit RGB without conversions and clean CSync signal generated on the PCB within the scart providing the highest possible signal quality and the lowest loss, two filtered audio channels improved, all pre configured on our OS"
via https://www.rgb-pi.com/
my bad, it's the 12v auto-switching that I was specifically thinking of, I misremembered!
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Interesting turn of events - my new cable for the PCE arrived today and now my PCE works with the gscartsw.
Only issue is that my colors are all wrong so I'm assuming that's a pin assignment issue. At least we're up and running now and it's not that the gscartsw hates the mod. *whew
EDIT: I rewired the 6 & 7 pins and now we're back in action.
Only issue is that my colors are all wrong so I'm assuming that's a pin assignment issue. At least we're up and running now and it's not that the gscartsw hates the mod. *whew
EDIT: I rewired the 6 & 7 pins and now we're back in action.
-
evil_ash_xero
- Posts: 6182
- Joined: Thu Jul 12, 2007 6:33 am
- Location: Where the fish lives
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Are these color issues (and whatever else) more common with the SCART switch? I am using SCART, but it's gong thru component converters, and will be going into the Component Switch. I'm hoping I don't run into these
issues. God knows I'm not going figure them out, easily.
issues. God knows I'm not going figure them out, easily.
My Collection: http://www.rfgeneration.com/cgi-bin/col ... Collection
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
In my experience the weird color issues with my NESRGB and Genesis were bad soldering from the mod. My modder did a not-so-great job on the connections, then hotglued the entire thing to the board. So to repair it I had to rip up the glue, then fix the solder. This is also with those RA cables that had easily breakable interfaces where their connections would break when stressed.evil_ash_xero wrote:Are these color issues (and whatever else) more common with the SCART switch? I am using SCART, but it's gong thru component converters, and will be going into the Component Switch. I'm hoping I don't run into these
issues. God knows I'm not going figure them out, easily.
I guess what I'm trying to say is it's usually not the switch! I have another SCART switch into my gcompsw and video issues are always in the cables.
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Mine definitely had nothing to do with the switch either - just some goofy pin assignments in the mod.evil_ash_xero wrote:Are these color issues (and whatever else) more common with the SCART switch? I am using SCART, but it's gong thru component converters, and will be going into the Component Switch. I'm hoping I don't run into these
issues. God knows I'm not going figure them out, easily.
-
evil_ash_xero
- Posts: 6182
- Joined: Thu Jul 12, 2007 6:33 am
- Location: Where the fish lives
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Good to hear.
My Collection: http://www.rfgeneration.com/cgi-bin/col ... Collection
-
- Posts: 1
- Joined: Mon Apr 20, 2020 7:03 pm
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Good things come to those who wait! Got my gscartsw today, just a week shy of five months in transit I think...
The switch looks great, hope I’ll have time to try it soon.
The switch looks great, hope I’ll have time to try it soon.
-
- Posts: 2
- Joined: Tue Sep 01, 2020 1:06 pm
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
After getting a bumper for my gscartsw_lite from Laser Bear, I discovered that the holes in the upper plexi are slightly misaligned. This causes it to sit above the SCART inputs instead of lying flush with them, and one of the screws was even bent as a result. Would it be possible for me to get a replacement for the upper plexi? Thanks in advance.
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
First time I hear this, what exactly is misaligned? All panels are precisely laser cut. Sometimes you have to fiddle with the SCART connectors a bit to get all of them inside the plexi openings. I have some spare panels but they are all the same. If you bent something installing the bumper case maybe you didn't do it right.Bonus Lizard wrote:After getting a bumper for my gscartsw_lite from Laser Bear, I discovered that the holes in the upper plexi are slightly misaligned. This causes it to sit above the SCART inputs instead of lying flush with them, and one of the screws was even bent as a result. Would it be possible for me to get a replacement for the upper plexi? Thanks in advance.
-
- Posts: 10
- Joined: Wed Aug 20, 2014 6:48 pm
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Just placed my order! Can't wait to get this to retire my Bandridge. Thanks for all you do superg!
-
- Posts: 75
- Joined: Mon Mar 02, 2020 8:43 pm
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
@superg
Hello, if I daisy chain this switch I have - GSCARTSW v5.2 2019 - Automatic 8-Input RGB SCART SWITCH GSCART to this gscart (the one that does not have VGA) I am wanting to buy on Ebay - https://www.ebay.com/itm/GSCARTSW-Autom ... 7e11e090e0
Will I have any issues with compatibility? Will there be any sync issues, loss of image/sound quality, or anything else that I need to know at all? I am planning on daisy chaining to a PVM-20M2U if that matters. Thanks!
Hello, if I daisy chain this switch I have - GSCARTSW v5.2 2019 - Automatic 8-Input RGB SCART SWITCH GSCART to this gscart (the one that does not have VGA) I am wanting to buy on Ebay - https://www.ebay.com/itm/GSCARTSW-Autom ... 7e11e090e0
Will I have any issues with compatibility? Will there be any sync issues, loss of image/sound quality, or anything else that I need to know at all? I am planning on daisy chaining to a PVM-20M2U if that matters. Thanks!
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
In general it should be fine. There might be some minor issues if you use a lot of sync clean circuits in your cables etc.teerazzler wrote:@superg
Hello, if I daisy chain this switch I have - GSCARTSW v5.2 2019 - Automatic 8-Input RGB SCART SWITCH GSCART to this gscart (the one that does not have VGA) I am wanting to buy on Ebay - https://www.ebay.com/itm/GSCARTSW-Autom ... 7e11e090e0
Will I have any issues with compatibility? Will there be any sync issues, loss of image/sound quality, or anything else that I need to know at all? I am planning on daisy chaining to a PVM-20M2U if that matters. Thanks!
I know a lot of users daisy chain different gscartsw versions without problem.
-
- Posts: 75
- Joined: Mon Mar 02, 2020 8:43 pm
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Awesome! Thank you for the fast reply. My scart cables are 75% bought from retroUK cables, not sure what you mean by clean circuit cables, but hopefully the ones I have won’t cause any problems? Shrug emoji
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
They integrate them in cable SCART connector for the consoles where it doesn't provide CSYNC (PS1 for example).teerazzler wrote:Awesome! Thank you for the fast reply. My scart cables are 75% bought from retroUK cables, not sure what you mean by clean circuit cables, but hopefully the ones I have won’t cause any problems? Shrug emoji
I wouldn't focus too much on this though, mostly it just works but if you have an issue, there usually is a way to figure that out.
-
- Posts: 75
- Joined: Mon Mar 02, 2020 8:43 pm
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Cool, I will go ahead and get that gscart off Ebay and then if there are any issues I will reach out to you here. Appreciate the fast replies!
-
- Posts: 75
- Joined: Mon Mar 02, 2020 8:43 pm
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
One last quick question, if I use the Retrotink comp2rgb adapter and plug in the official Gamecube component cable into the Retrotink, then use a male to male cable with one end going into the retrotink, the other into the gscart I have, should that work with no issues? I read a few posts on this forum about it but I couldn't get a solid answer. This will determine if I spend hundreds on this, so I hope you can clarify. Thanks!superg wrote:They integrate them in cable SCART connector for the consoles where it doesn't provide CSYNC (PS1 for example).teerazzler wrote:Awesome! Thank you for the fast reply. My scart cables are 75% bought from retroUK cables, not sure what you mean by clean circuit cables, but hopefully the ones I have won’t cause any problems? Shrug emoji
I wouldn't focus too much on this though, mostly it just works but if you have an issue, there usually is a way to figure that out.
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Most likely it will work but in general you don't want to increase the cable length much and add additional processing so it's better to get some gcvideo based solution which gives you progressive RGBS directly from GC digital port.teerazzler wrote: One last quick question, if I use the Retrotink comp2rgb adapter and plug in the official Gamecube component cable into the Retrotink, then use a male to male cable with one end going into the retrotink, the other into the gscart I have, should that work with no issues? I read a few posts on this forum about it but I couldn't get a solid answer. This will determine if I spend hundreds on this, so I hope you can clarify. Thanks!
-
- Posts: 75
- Joined: Mon Mar 02, 2020 8:43 pm
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Ah, well my intent here is so all of my component consoles are plugged into the gscart (basically just want every console I own plugged into the gscart) so I can just turn on and play, not have to switch over to s-video or the component line. I hope that it works with no issues!superg wrote:Most likely it will work but in general you don't want to increase the cable length much and add additional processing so it's better to get some gcvideo based solution which gives you progressive RGBS directly from GC digital port.teerazzler wrote: One last quick question, if I use the Retrotink comp2rgb adapter and plug in the official Gamecube component cable into the Retrotink, then use a male to male cable with one end going into the retrotink, the other into the gscart I have, should that work with no issues? I read a few posts on this forum about it but I couldn't get a solid answer. This will determine if I spend hundreds on this, so I hope you can clarify. Thanks!
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Hello, I own a gcompsw already, but I'm hoping to get some advice about setup issues. I have multiple composite and component systems connected, and so am obviously having to use both outputs on the gcompsw since my understanding is that there is no way for a component cable to carry a composite signal. The reason I am using a gcompsw is so I can fully automate input switching and hide all my AV stuff behind my TV.
I am really just trying to find a way to make that fully automated setup work. If my current setup won't do it, then I'm open to other suggestions, ideally still using the gcompsw because I like this product.
I have my composite output going into a Koryuu transcoder, which transcodes it to component and connects to the component input on the OSSC. For the component output of the gcompsw, I have it connected to the RetroTink COMP2RGB, which converts to SCART and connects to OSSC SCART input. I have input autodetection enabled for OSSC.
The problem is that the Koryuu seems to ALWAYS be outputting a signal, even when it's not receiving one from gcompsw. I realize that all I have to do is press a button on the OSSC remote to switch, and that seems really trivial, but the idea of a fully automated setup is just something that really appeals to me, so I'm trying to overcome this last hurdle.
One possibility that I have thought about was getting a second gcompsw. I can connect composite systems to the second gcompsw, run that composite output through the Koryuu transcoder, and then connect that to the first gcompsw. However, I am wondering if that might not cause the same issue I'm experiencing with the OSSC. In other words, if the Koryuu is always on, would that cause the first gcompsw to think it's always getting an input and cause issues switching?
Here is a diagram of my setup.
I am really just trying to find a way to make that fully automated setup work. If my current setup won't do it, then I'm open to other suggestions, ideally still using the gcompsw because I like this product.
I have my composite output going into a Koryuu transcoder, which transcodes it to component and connects to the component input on the OSSC. For the component output of the gcompsw, I have it connected to the RetroTink COMP2RGB, which converts to SCART and connects to OSSC SCART input. I have input autodetection enabled for OSSC.
The problem is that the Koryuu seems to ALWAYS be outputting a signal, even when it's not receiving one from gcompsw. I realize that all I have to do is press a button on the OSSC remote to switch, and that seems really trivial, but the idea of a fully automated setup is just something that really appeals to me, so I'm trying to overcome this last hurdle.
One possibility that I have thought about was getting a second gcompsw. I can connect composite systems to the second gcompsw, run that composite output through the Koryuu transcoder, and then connect that to the first gcompsw. However, I am wondering if that might not cause the same issue I'm experiencing with the OSSC. In other words, if the Koryuu is always on, would that cause the first gcompsw to think it's always getting an input and cause issues switching?
Here is a diagram of my setup.
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
I finally received the scart <> RCA converter with direction switch, but what happened was that it simply blew the image in overblown grey (see pic). I have no idea what is going on. I am using the rca sockets on front of my Sony Trinitron KV-21LT1U meant for DV camcorders - there are no "real" dedicated RCA inputs in that model there so I wonder if that means that there is no way to connect C64/C128D through gscartsw into trinitron? In that case I can still use the aerial cable, it just looks like the upper image.superg wrote:Yes, that will work. You can also utilize two outputs at the same time, one using SCART->SCART cable for your RGB sources and the other RCA one for composite only sources. You will still have to use a TV remote to switch between SCART and composite mode though.MJR wrote: I just realized the same thing - I can't get picture out from my c128D; and I was using s-video/scart adapter.
But I was left confused by what you mean by "taking CVBS from one of the gscart outputs"? Did you mean that I should put this into the other output, switch the mode to "out", then plug the RCA cables into television? While still using the same Scart cable I've been using with my c64/128 with previous scart switches?
You can even forward S-Video this way with adapters.
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Passive SCART->RCA adapters usually don't have any active components inside so maybe something else is wrong here.MJR wrote: I finally received the scart <> RCA converter with direction switch, but what happened was that it simply blew the image in overblown grey (see pic). I have no idea what is going on. I am using the rca sockets on front of my Sony Trinitron KV-21LT1U meant for DV camcorders - there are no "real" dedicated RCA inputs in that model there so I wonder if that means that there is no way to connect C64/C128D through gscartsw into trinitron? In that case I can still use the aerial cable, it just looks like the upper image.
Let's make sure I understand what you're doing.
So you have a Commodore 128 with composite RCA output (yellow connector).
When you connect it directly (excluding gscartsw) to your TV front RCA yellow socket, is it all good?
Now, when you connect the same c128 yellow connector to the switch, how do you do it? Are you using the same RCA->SCART adapter in input mode?
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
Thanks for the quick reply.superg wrote:Passive SCART->RCA adapters usually don't have any active components inside so maybe something else is wrong here.MJR wrote: I finally received the scart <> RCA converter with direction switch, but what happened was that it simply blew the image in overblown grey (see pic). I have no idea what is going on. I am using the rca sockets on front of my Sony Trinitron KV-21LT1U meant for DV camcorders - there are no "real" dedicated RCA inputs in that model there so I wonder if that means that there is no way to connect C64/C128D through gscartsw into trinitron? In that case I can still use the aerial cable, it just looks like the upper image.
Let's make sure I understand what you're doing.
So you have a Commodore 128 with composite RCA output (yellow connector).
When you connect it directly (excluding gscartsw) to your TV front RCA yellow socket, is it all good?
Now, when you connect the same c128 yellow connector to the switch, how do you do it? Are you using the same RCA->SCART adapter in input mode?
C128D goes into gscartw with SCART cable, which I assume has to be S-video.
From the gscartw I use the 2nd output with SCART<>RCA connector in output mode, and I use the yellow connector (in tv front). This gives grey image. Black connector/audio works ok as expected.
Re: gscartsw / gscartsw_lite / gcompsw switches support thre
So that's pretty much explains it. You're sending S-Video signal on input but trying to get composite signal on output. The switch doesn't transcode the signal, I mentioned this before - no conversions between composite<->component<->s-video<->RGBS. In order to get composite signal working on your TV, you have to supply composite signal on input.MJR wrote: C128D goes into gscartw with SCART cable, which I assume has to be S-video.
From the gscartw I use the 2nd output with SCART<>RCA connector in output mode, and I use the yellow connector (in tv front). This gives grey image. Black connector/audio works ok as expected.