The console was working fine over AV before I installed the mod.
AFTER I installed the mod the fuse blew. I replaced the fuse and then the console worked fine over AV and when using RGB it showed that red interference.
I then opened it again some months later to try and fix it and here we are now
![Razz :P](./images/smilies/icon_razz.gif)
I've just removed the mod board and tried powering it up with NO RGB CABLE OR AV CABLE, and no game. The light didn't even turn on, fuse blown presumably as I plugged in the power cable.
On a previous attempt which I posted about the console powered up fine (I think?) without the cable, but then as soon as i plugged in the RGB cable and turned it on the fuse blew.
For what its worth, I get no continuity across C11, i'm pretty sure the continuity on my multimeter was reading like 400 or something before.
I looked closely at R11,21,31 on the board and they say "122" on them. I couldn't get a clear picture of them.
Here are some pictures of the main SNES board without the mod board as well as pictures of my SCART cable:
https://imgur.com/a/R2L8T6G
To sum up WHEN THE MOD BOARD WAS STILL INSTALLED, the fuse would blow before I even turn it on, and on one occasion turned on fine (maybe?) but then the after I plugged in the RGB cable (to the OSSC and my monitor) and turned it on the light stayed on for a second then turned off.
WITH THE MOD BOARD NOW UNSINSTALLED, the fuse blew with just the power plug in. I don't know if it blew when I turned it on or if It was when I plugged it in.
This is proving to be rather stressful...
![Sad :(](./images/smilies/icon_sad.gif)