I have received the HR 6415 wich is what HR Diemen supply as replacement for sony 1-439-372-32 (PVM 2130qm) but The HR one have the scrren pot on the flyback otherwise the genuine one not because on 2130qm the screen pot is located on the neck board.
Have any of you tried to install one of these HR flybacks on a PVM? Do you have any advice?
PVM 2130QM flyback
-
buttersoft
- Posts: 383
- Joined: Sun Jul 24, 2016 7:49 am
Re: PVM 2130QM flyback
Can HR Diemen offer any advice?
If not, you could always try this listing. I says it's a substitute for the -32 part number for the 2130QM
If not, you could always try this listing. I says it's a substitute for the -32 part number for the 2130QM
Re: PVM 2130QM flyback
buttersoft wrote:Can HR Diemen offer any advice?
If not, you could always try this listing. I says it's a substitute for the -32 part number for the 2130QM
Thank you so much! I have already purcheased two of those flyback from ebay. The pinout of the HR doesn't completely match the original though. The B+ is on pin 4 on the HR and on pin 5 on the original. Not optimal, may result in ringing (organ pipes aka jailbars).
https://www.donberg-electronics.com/pics/h/hr_6415.jpg
So on the HR 6415 a mod may be required, I hope that the ones from ebay will be direct swap.