Might as well leak this info out. @chriz2600 and I decided to hold off on the PS2 and release a PS1 variant first. Prototypes will be purchased soon. This will be a no cut mod w/HDMI in place of the serial port.
PS1HDMI
PS1HDMI
Taken from citrus3000psi twitter:
Last edited by juji82 on Mon Sep 23, 2019 11:21 pm, edited 1 time in total.
-
- Posts: 1974
- Joined: Wed Jul 19, 2017 1:52 pm
Re: PS1HDMI
Glad to see this is finally coming along! It's probably a safe assumption that there won't be an alternative install method that allows the serial port to remain intact. :/
(Also, please put the large image in a spoiler tag.)
(Also, please put the large image in a spoiler tag.)
-
- Posts: 628
- Joined: Sat Jan 07, 2017 5:11 pm
Re: PS1HDMI
Man, now all the fat PS1's with I/O ports will disappear
-
- Posts: 2184
- Joined: Mon Aug 14, 2017 8:34 pm
Re: PS1HDMI
I think that's a different port, which coincidentally the PSIO utilizes so thankfully there's no conflict there. The serial port was used for hooking up two consoles and maybe other stuff.tongshadow wrote:Man, now all the fat PS1's with I/O ports will disappear
-
- Posts: 628
- Joined: Sat Jan 07, 2017 5:11 pm
Re: PS1HDMI
Oh yes, Im aware of the Parallel I/O port, which was used for Gameshark mostly. The serial I/O was the one that was never removed right?fernan1234 wrote:I think that's a different port, which coincidentally the PSIO utilizes so thankfully there's no conflict there. The serial port was used for hooking up two consoles and maybe other stuff.tongshadow wrote:Man, now all the fat PS1's with I/O ports will disappear
-
- Posts: 2184
- Joined: Mon Aug 14, 2017 8:34 pm
Re: PS1HDMI
Sound is noticeably inferior on these so they should be avoided in general, but ironically an HDMI board may have fixed that if the problem lies in the DAC.opt2not wrote: Another PS1 device that doesn't support the PSOne model.
Re: PS1HDMI
Looks like there are plans to save the serial port.
With so many requests about the serial port, @chriz2600 thinks it’s possible to use the esp32 for wireless connectivity. To either other ps1 hdmi consoles or a separate hardware adapter.
Re: PS1HDMI
Really? That’s the first I’ve heard about this.fernan1234 wrote: Sound is noticeably inferior on these so they should be avoided in general, but ironically an HDMI board may have fixed that if the problem lies in the DAC.
I love my PSOne, it’s a great size and has a great aesthetic. The LCD attachment is fantastic too. I can’t give up on these units, they’re just too awesome.
-
- Posts: 1974
- Joined: Wed Jul 19, 2017 1:52 pm
Re: PS1HDMI
Neat! I wonder how that would be configured, whether it's ad hoc or can connect to a WLAN (and download firmware updates, a la DCHDMI). Frankly, I'd like to see a wired variant; 2.4GHz is crowded where I am.juji82 wrote:Looks like there are plans to save the serial port.With so many requests about the serial port, @chriz2600 thinks it’s possible to use the esp32 for wireless connectivity. To either other ps1 hdmi consoles or a separate hardware adapter.
Also, I hope the peering is dead-simple to use; should be able to broadcast after connecting to a [W]LAN, list all the other broadcasting and unpaired PS1HDMIs, and automatically pair if it only finds one device after a few seconds.
On top of that, if it does connect to a [W]LAN, and latency isn't a problem, it might also be possible to set up a tunnel and play over the internet.
Re: PS1HDMI
I'm happy to see this happen, although I'm not sure I understand the logic of creating a no cut mod that instead of sacrificing a bit of the plastic shell, removes one of the dedicated functions of the console. Personally I think it's less destructive to just cut a hole.
plus ça change,
plus c'est la même chose,
The more that things change,
The more they stay the same.- RUSH- Circumstances
I install and sell mods at arthrimus.com | SNES RGB Bypass+Dejitter available now! | Watch me live stream my work on YouTube
plus c'est la même chose,
The more that things change,
The more they stay the same.- RUSH- Circumstances
I install and sell mods at arthrimus.com | SNES RGB Bypass+Dejitter available now! | Watch me live stream my work on YouTube
-
- Posts: 1974
- Joined: Wed Jul 19, 2017 1:52 pm
Re: PS1HDMI
It really depends on who you ask. I think there are a lot of people who don't have link cables (like me), or they only have one console, or they have zero interest in using the serial port for anything; for those people, it doesn't make a tangible difference that the serial port gets removed.Arthrimus wrote:I'm happy to see this happen, although I'm not sure I understand the logic of creating a no cut mod that instead of sacrificing a bit of the plastic shell, removes one of the dedicated functions of the console. Personally I think it's less destructive to just cut a hole.
For those that do want both an HDMI mod and keep the serial port, or for those that only want or need the HDMI mod in one of their consoles (not both), or for those that have PSones, I think they should make available an alternate installation method.
In defense of their proposal of using wireless (and I'm still hoping for a wired option) for serial networking, if the antenna is strong enough and latency is low enough to allow two consoles with his mod installed to connect via WiFi, then you're no longer limited to the length of the serial cable, and, as I mentioned in an earlier post, it might be possible to link over the internet.
-
citrus3000psi
- Posts: 668
- Joined: Wed Dec 25, 2013 11:56 pm
- Location: Indiana
Re: PS1HDMI
750x and later (including PSONE) do not have digital audio available. Installation is not the reason for not including the PSONE, its the audio.
Re: PS1HDMI
juji82 wrote:Taken from citrus3000psi twitter:Might as well leak this info out. @chriz2600 and I decided to hold off on the PS2 and release a PS1 variant first.
Spoiler
-
- Posts: 1974
- Joined: Wed Jul 19, 2017 1:52 pm
Re: PS1HDMI
My personal opinion is that SCPH-550x is ideal. It's old enough that it still has the parallel port and the ideal sound chip, but new enough that it has the rotated CD assembly (so it doesn't suffer a slow heat death due to proximity to the PSU). On the other hand, if you're not going to use the CD drive at all, and you're not going to use analogue audio, any model that has a parallel port should work.Seraphic wrote:juji82 wrote:Taken from citrus3000psi twitter:Might as well leak this info out. @chriz2600 and I decided to hold off on the PS2 and release a PS1 variant first.But on a serious note: I think I will stick with PS2 for PS1+PS2 games, but what would be the ideal PS1 model for using the PS1HDMI and PSIO? SCPH-1001 or SCPH-5501Spoiler
Re: PS1HDMI
I searched Twitter and couldn't find anything about the scaling options. Will it support 720p or 960p scaling?
I still haven't found a great way to scale 480p digital, so it would be great if this mod didn't have that limitation.
I still haven't found a great way to scale 480p digital, so it would be great if this mod didn't have that limitation.
Re: PS1HDMI
Well that's unfortunate.citrus3000psi wrote:750x and later (including PSONE) do not have digital audio available. Installation is not the reason for not including the PSONE, its the audio.
I'm not an audiophile, so I don't notice any difference with the digital vs analog audio output. So to me, not having digital audio doesn't really matter. But surely someone could come out with an HDMI device that converts the analog audio to digital to feed an HDMI standard.
I'll just stick to using my OSSC for PSOne.
-
- Posts: 1974
- Joined: Wed Jul 19, 2017 1:52 pm
Re: PS1HDMI
I haven't seen anything regarding scaling, but, if citrus3000psi is doing it, I would think it would be on-par with the capability of the Dreamcast (480p, 960p, 960p windowboxed to 1080p).strygo wrote:I searched Twitter and couldn't find anything about the scaling options. Will it support 720p or 960p scaling?
I still haven't found a great way to scale 480p digital, so it would be great if this mod didn't have that limitation.
That said, the PS1 is an older system that's limited to 15kHz modes; so I would expect at least 4x 240p/480i to 960p (2x for 288p/576i) and 960p windowboxed to 1080p, and we might see a 3x240/1.5x480 scale to 720p (which I think would be better for 4K displays, although a 1.5x deinterlaced 480i would still look kind of crappy).
It should be feasible to build a version of the HDMI board (or a unified board that can accommodate both use cases) for those later models that would digitize the analogue audio.opt2not wrote:Well that's unfortunate.citrus3000psi wrote:750x and later (including PSONE) do not have digital audio available. Installation is not the reason for not including the PSONE, its the audio.
I'm not an audiophile, so I don't notice any difference with the digital vs analog audio output. So to me, not having digital audio doesn't really matter. But surely someone could come out with an HDMI device that converts the analog audio to digital to feed an HDMI standard.
Re: PS1HDMI
One great benefit of this internal solution is that the device will have the original pixel clock available.
It'll always look as good as a perfectly optimized OSSC, in all possible modes
It'll always look as good as a perfectly optimized OSSC, in all possible modes
Re: PS1HDMI
The PlayStation I had when I was a kid was a SCPH-9001 so that's no good.nmalinoski wrote: My personal opinion is that SCPH-550x is ideal. It's old enough that it still has the parallel port and the ideal sound chip, but new enough that it has the rotated CD assembly (so it doesn't suffer a slow heat death due to proximity to the PSU). On the other hand, if you're not going to use the CD drive at all, and you're not going to use analogue audio, any model that has a parallel port should work.
Maybe I will try to find a cheap SCPH-5501 just in case I ever want to mod it.
-
citrus3000psi
- Posts: 668
- Joined: Wed Dec 25, 2013 11:56 pm
- Location: Indiana
Re: PS1HDMI
Its possible but is it worth it? I don't think so. PS1's are dirt cheap. Why spend so much effort for making separating revisions for specific consoles. Just buy a 500x-700x and call it day. Managing multiple revisions etc doesn't make sense on a console that costs 30USD.nmalinoski wrote:It should be feasible to build a version of the HDMI board (or a unified board that can accommodate both use cases) for those later models that would digitize the analogue audio.
As for the serial port, there might be a work around with piping the protocol over wireless but no guarantees. When these consoles were designed, engineers did not think to leave a free spot for and an hdmi connector. I didn't sit and think, "Ok what is the most inconvenient spot for people" Then go that route. Its a give and take situation. I could put the HDMI out the side and have you chop the metal case all up. This would keep the port serial intact.
Again PS1's are dirt cheap, if you want to use the serial port then you can always use a different console.
Re: PS1HDMI
What's stopping you from squeezing a mini HDMI port between the serial port and rear center screw post? I know this would require some metal cutting but it would at least keep the full functionality of the console intact.citrus3000psi wrote:Its possible but is it worth it? I don't think so. PS1's are dirt cheap. Why spend so much effort for making separating revisions for specific consoles. Just buy a 500x-700x and call it day. Managing multiple revisions etc doesn't make sense on a console that costs 30USD.nmalinoski wrote:It should be feasible to build a version of the HDMI board (or a unified board that can accommodate both use cases) for those later models that would digitize the analogue audio.
As for the serial port, there might be a work around with piping the protocol over wireless but no guarantees. When these consoles were designed, engineers did not think to leave a free spot for and an hdmi connector. I didn't sit and think, "Ok what is the most inconvenient spot for people" Then go that route. Its a give and take situation. I could put the HDMI out the side and have you chop the metal case all up. This would keep the port serial intact.
Again PS1's are dirt cheap, if you want to use the serial port then you can always use a different console.
plus ça change,
plus c'est la même chose,
The more that things change,
The more they stay the same.- RUSH- Circumstances
I install and sell mods at arthrimus.com | SNES RGB Bypass+Dejitter available now! | Watch me live stream my work on YouTube
plus c'est la même chose,
The more that things change,
The more they stay the same.- RUSH- Circumstances
I install and sell mods at arthrimus.com | SNES RGB Bypass+Dejitter available now! | Watch me live stream my work on YouTube
-
- Posts: 1974
- Joined: Wed Jul 19, 2017 1:52 pm
Re: PS1HDMI
You have a point; I've not been up to speed on the current prices of secondhand PlayStations, and it is fairly easy to get a compatible model. I was thinking that the addition of an ADC for compatibility with the other consoles (and the increase in cost that would come with it) would vastly increase the potential userbase; but an extra $30 on top of what's probably going to be another $150 mod kit likely won't make a difference.citrus3000psi wrote:Its possible but is it worth it? I don't think so. PS1's are dirt cheap. Why spend so much effort for making separating revisions for specific consoles. Just buy a 500x-700x and call it day. Managing multiple revisions etc doesn't make sense on a console that costs 30USD.nmalinoski wrote:It should be feasible to build a version of the HDMI board (or a unified board that can accommodate both use cases) for those later models that would digitize the analogue audio.
As for the serial port, there might be a work around with piping the protocol over wireless but no guarantees. When these consoles were designed, engineers did not think to leave a free spot for and an hdmi connector. I didn't sit and think, "Ok what is the most inconvenient spot for people" Then go that route. Its a give and take situation. I could put the HDMI out the side and have you chop the metal case all up. This would keep the port serial intact.
Again PS1's are dirt cheap, if you want to use the serial port then you can always use a different console.
There really isn't a whole lot of room right there. Mine (SCPH-5501) has about an inch between the case and the mainboard's heat shield (covers half the ICs; I'm certain I'll have to remove it, at least temporarily, to install the QSB).Arthrimus wrote:What's stopping you from squeezing a mini HDMI port between the serial port and rear center screw post? I know this would require some metal cutting but it would at least keep the full functionality of the console intact.
On the bright side, if the HDMI port could be routed to that location, it could be anchored using the two closest screws (one from the serial port and one from the AV Multi-out) with one or two 3D-printed parts; the section of the EM shield that would need to come off should come off relatively easily (just like with the DCHDMI); and we'd only need a small notch in the top shell. If it could be done, it'd be less work than the DCHDMI, and no desoldering would be needed.
There seems to be plenty of room underneath the mainboard, but the HDMI port would need to go directly under the serial port or directly under the AV Multi-out, and there's no clearance to wrap a flex cable around to the bottom.
-
citrus3000psi
- Posts: 668
- Joined: Wed Dec 25, 2013 11:56 pm
- Location: Indiana
Re: PS1HDMI
It might be possible to put a mini HDMI next to the serial port.
-The serial port was originally targeted so Late PU8 and the PU16 boards could work.
-Where Mini HDMI the filing would cause around around 2mm open gap below the connector due to where the cases meet.
-Its also dead simple to desolder the serial port. I've done it with braid (I have pump but wanted to see how feasible this was for a user) and its very simple.
The board will not fit under the mainboard. The ESP32 has to sit on top of the PCB, it cannot be flush like the DCHDMI. Maybe it could but would be super labor intensive and likely have a lot of errors. Fab solders the ESP2866 on the DCHDMI by hand. I'm trying to avoid that type of labor. The flex cables also can be very short with the board on the top and won't need series resistors on the flex. Flex assembly is very much a pain.
The plan is to send the serial data over ESP32. Meaning:
Two HDMI consoles can link.
One HDMI console with one link box (separate ESP32 with soldered on serial port) can still link to a non HDMI console.
Dev users will no longer need a cable as they can use something like socat to connect. (But could still use the link box if they chose too)
-The serial port was originally targeted so Late PU8 and the PU16 boards could work.
-Where Mini HDMI the filing would cause around around 2mm open gap below the connector due to where the cases meet.
-Its also dead simple to desolder the serial port. I've done it with braid (I have pump but wanted to see how feasible this was for a user) and its very simple.
The board will not fit under the mainboard. The ESP32 has to sit on top of the PCB, it cannot be flush like the DCHDMI. Maybe it could but would be super labor intensive and likely have a lot of errors. Fab solders the ESP2866 on the DCHDMI by hand. I'm trying to avoid that type of labor. The flex cables also can be very short with the board on the top and won't need series resistors on the flex. Flex assembly is very much a pain.
The plan is to send the serial data over ESP32. Meaning:
Two HDMI consoles can link.
One HDMI console with one link box (separate ESP32 with soldered on serial port) can still link to a non HDMI console.
Dev users will no longer need a cable as they can use something like socat to connect. (But could still use the link box if they chose too)
Re: PS1HDMI
I feel like it would be better to keep the serial port if possible (I'm just not a fan of removing original features unless absolutely necessary)
Isn't the PU-16 revision rare and limited to Asian markets? and the later model PU-8 revisions (The -21 and later sub-revisions I assume?) are also kind of uncommon and IIRC are usually mixed in with different model numbers:-
https://en.wikipedia.org/wiki/PlayStati ... _of_models
https://commons.wikimedia.org/wiki/Cate ... therboards
In which case I would be tempted to only 'officially' support the PU-18 (SCPH-55XX) and PU-20 (SCPH-70XX) revisions, and keep the serial port.
Isn't the PU-16 revision rare and limited to Asian markets? and the later model PU-8 revisions (The -21 and later sub-revisions I assume?) are also kind of uncommon and IIRC are usually mixed in with different model numbers:-
https://en.wikipedia.org/wiki/PlayStati ... _of_models
https://commons.wikimedia.org/wiki/Cate ... therboards
In which case I would be tempted to only 'officially' support the PU-18 (SCPH-55XX) and PU-20 (SCPH-70XX) revisions, and keep the serial port.
-
- Posts: 1974
- Joined: Wed Jul 19, 2017 1:52 pm
Re: PS1HDMI
I know this is reasonably off-topic, but, when you get around to the PS2 version, I hope there's a more eloquent method of getting digital audio out of the console than tapping S/PDIF output, because there are apparently a handful of games that don't support optical audio, PaRappa the Rapper 2 being one of them.
Re: PS1HDMI
and Fantavision, which I still enjoy playing from time to time!
OSSC Forums - http://www.videogameperfection.com/forums
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Please check the Wiki before posting about Morph, OSSC, XRGB Mini or XRGB3 - http://junkerhq.net/xrgb/index.php/Main_Page
Re: PS1HDMI
I had a question, PS1 games as well as Saturn, DS and 3DS games run at a 59.83Hz refresh rate. So for example the GBA Consolizer converted the 59.73Hz of the GBA to 60Hz, the reason for that is that most HDMI displays wouldn't like refresh rates such as 59.73Hz or 59.83Hz (while most CRTs do not have this problem). So does that mean that like the GBA Consolizer that the refresh rate on the PS1HDMI is converted to something like 59.94Hz or 60Hz?
The problem is that video and audio varies quite a bit from one PS1 model to another.
I am not sure if "inferior" is the right word, but I can confirm that the sound is kind of "muffled" or of lower intensity then what I get when I play PS1 games on my SCPH-39001 PS2 with Toslink Digital Audio.fernan1234 wrote:Sound is noticeably inferior on these so they should be avoided in general, but ironically an HDMI board may have fixed that if the problem lies in the DAC.
The problem is that video and audio varies quite a bit from one PS1 model to another.