no audio with ossc even tho it's the hdmi audio version.

[Elrinth]

Hi!
I even tried flashing the new firmware. still no audio out. what can I have done?

I have SuperGrafX -> gscartsw -> pvm & ossc.
ossc generates image, but no audio.
I have had audio previously so I don't know what's different.
I got audio to the PVM.

[SavagePencil]

1. Which firmware, specifically, did you download and flash?
2. What does the OSSC say when it boots up for firmware installed?
3. Are you running audio out of the OSSC via HDMI or via the 1/8th inch headphone jack?
4. Have you verified that audio works with another HDMI source?

[Elrinth]

1. I updated to: ossc_0.83-aud.bin 10-Jun-2019 14:29 303648
2. It says: 0.83a
3. I don't know. How do I know this?
4. Audio works if I switch to the Analogue SG or if I use the PS4 and probably all other systems aswell.

EDIT: Solved!
I switched scart cable to a sturdier with gold plated between gscartsw and the ossc and now it works. It seems the scart cable itself was halfbroken. Now works like a clock! Sorry for the bother!

[Elrinth]

new problem. connecting the virtual boy via the rgb out board to the gscartsw and I have image on my pvm, but the OSSC will not sync it no matter what. tips?
if i select RGsB or YPbPr it will be synced, but there is no image coming out in the hdmi @ 261p and 15.73kHz and 60.28Hz.
I can use on the framemeister, tho I can see the image is not perfect, it's a bit wavy, also it looses sync shortly every minute or so.
on the pvm it looks flawless and never loses sync.

[BuckoA51]

I used mine with Furtek's Virtual Boy Interface and there were no problems, I would check your cables and your installation.