superg wrote:I think this is pure mechanical switch, should work but it's overkill I'd say. I would take two RCA connectors, one male and one female and solder 1 pos switch in between.r3ddvil wrote: https://www.amazon.ca/Fosmon-Technology ... way&sr=8-3
What about something like this for just the Y/Green piped through the yellow video connector. Does the fact that its composite designed affect the signal transmission (I assume no since there's no processing).
In theory of coarse, since I don't expect you have tested this piece of hardware or setup.
Thanks again. You're probably right about the overkill, but for practical reasons I'll try the simplest approach first. Not owning a soldering iron or having every attempted such a task, for $12 I'll see if the shoe fits for now.
Cheers.