Hello,
Recently acquired unwanted BVM-A20F1U with BKM-68x, bring it back home and when i switch it on, the standby would blink for a few sec as my D20 but shortly after the 'Operate' light start to blink.
Any ideas on how to fix this ?
BVM-A20F1M Blinking 'Operate' light
-
- Posts: 200
- Joined: Sun May 04, 2014 9:49 am
- Location: germany
Re: BVM-A20F1M Blinking 'Operate' light
I would try to reseat all boards (power supply, deflection etc.) and try again
Re: BVM-A20F1M Blinking 'Operate' light
Hello,
You likely have a bad ISR board. I might be able to help you out. Send me a PM.
Talk soon
You likely have a bad ISR board. I might be able to help you out. Send me a PM.
Talk soon
Re: BVM-A20F1M Blinking 'Operate' light
Thank you ! it work ! I'm all good. I re seat all boards, i also changed my BKM-68x from slot 1 to slot 3. Thank you so much !svensonson wrote:I would try to reseat all boards (power supply, deflection etc.) and try again
Re: BVM-A20F1M Blinking 'Operate' light
Thank you for the offer, if the problem arise again.. i will PM you.philexile wrote:Hello,
You likely have a bad ISR board. I might be able to help you out. Send me a PM.
Talk soon