Will you be adding a DIP switch block, or is that too old-school?superg wrote:...I will add 4 positions configuration array which will control various switch functions (clean sync, sog forward or convert, sog leave sync on green or remove and something else).
![Razz :P](./images/smilies/icon_razz.gif)
As for the fourth configuration, the only other thing I can think that people might want to change is the switching behavior. For example, staying locked on the current input as long as it's active (which is the current behavior, yes?) versus automatically switching to an input when it becomes active, even if the current input is active; but who would really want that?
Unrelated thought: If the gscartsw didn't have hardwired voltages for blanking and aspect, a switch array could be added to allow overrides for these, like forcing composite or RGB, forcing 4:3 or 16:9, or replicating/passing-through the source voltages.
Also, should theoretically be possible to power the gscartsw from a SCART source, but I imagine it would be too complex and expensive to add the components required to deal with power from multiple active sources and output 12V for the 4:3 override when only receiving 5V from a source (like an NTSC SNES), and I doubt anyone would have a real need for this.