On my "D1" board (Uno design), the new pin is actually labeled "D13 / SCK". In the IDE, it is named "D5".
At this point, I don't have any rules anymore. It's random! ><
What I do is, I google some images of my board and usually see some similar ones. All the variants have a different name on the same physical pin location.
I just try some of those names in the IDE, and usually the first or 2nd works.
The Serial Monitor will tell you if the wire is connected.
Code: Select all
post preset done
VSYNC wire connected :)
Debug wire connected :)
in field time: 19999
out field time: 20091