Everdrives could cause damages...?
-
- Posts: 508
- Joined: Sun May 12, 2013 5:03 pm
Re: Everdrives could cause damages...?
I think it's bad form and repairs should be done at cost if possible. If not that, giving owners of affected carts a significant discount on properly designed replacements. If detailed sale records aren't kept, mailing them in should suffice.
No future carts should be out of spec if making it right isn't going to happen
.
No future carts should be out of spec if making it right isn't going to happen
![Neutral :|](./images/smilies/icon_neutral.gif)
-
bobrocks95
- Posts: 3472
- Joined: Mon Apr 30, 2012 2:27 am
- Location: Kentucky
Re: Everdrives could cause damages...?
Krikzz's response comes across as really arrogant...
"There haven't been problems" doesn't mean the design isn't incredibly poor.
Since he's switched to level translation on the newer Everdrives, it's clear he realized the problem, yet he STILL won't admit he was wrong...
"There haven't been problems" doesn't mean the design isn't incredibly poor.
Since he's switched to level translation on the newer Everdrives, it's clear he realized the problem, yet he STILL won't admit he was wrong...
PS1 Disc-Based Game ID BIOS patch for MemCard Pro and SD2PSX automatic VMC switching.
-
ChuChu Flamingo
- Posts: 293
- Joined: Sun Feb 19, 2012 9:32 am
- Location: United States
Re: Everdrives could cause damages...?
Hard to say what damage is being done but it is theoretically possible.
It is much the same as certain scart cables not properly attenuating Csync to 75 ohms or just passing it through. All the rage these days all of a sudden lol.
People saying it works on their setup for x years is literally what Rene prefaced with his "I've smoked for 2 years and don't have cancer, therefor smoking doesn't cause cancer" quote.Saying we haven't seen a case yet kinda comes off as pompous instead of acknowledging yeah it can potentially.
What developers of homebrew should take from this is that it can be a "potential" failure of a system and that future designs should have proper voltage transitions on all I/O.
It is much the same as certain scart cables not properly attenuating Csync to 75 ohms or just passing it through. All the rage these days all of a sudden lol.
People saying it works on their setup for x years is literally what Rene prefaced with his "I've smoked for 2 years and don't have cancer, therefor smoking doesn't cause cancer" quote.Saying we haven't seen a case yet kinda comes off as pompous instead of acknowledging yeah it can potentially.
What developers of homebrew should take from this is that it can be a "potential" failure of a system and that future designs should have proper voltage transitions on all I/O.
Re: Everdrives could cause damages...?
Right or wrong, there isn't really anything Krikzz can do about it at this point: as a business, he couldn't afford to recall all existing Everdrives, and if all future products will have the issue fixed, there's not much more that he could do.
Admitting fault has legal ramifications that he may not be able to afford.
That said, he really ought to address the issue on all his existing products so that all future manufacturing runs of the older products are also corrected.
Admitting fault has legal ramifications that he may not be able to afford.
That said, he really ought to address the issue on all his existing products so that all future manufacturing runs of the older products are also corrected.
Re: Everdrives could cause damages...?
His cancer analogy is pretty poor, there's no manufacturer safety margin on smoking cigarettes like there are for electrical specs. I do agree that this isn't good and krikzz should fix it going forward.
If it works on his existing carts (take megadrive for example) and we're not hearing about mass failure, then he got lucky and the protection diodes can likely handle the current.
Pretty sure the EEVblog guy ran chips out of spec for his electrical meter, but I think he also contacted the manufacturer to confirm it was ok.
If it works on his existing carts (take megadrive for example) and we're not hearing about mass failure, then he got lucky and the protection diodes can likely handle the current.
Pretty sure the EEVblog guy ran chips out of spec for his electrical meter, but I think he also contacted the manufacturer to confirm it was ok.
-
ChuChu Flamingo
- Posts: 293
- Joined: Sun Feb 19, 2012 9:32 am
- Location: United States
Re: Everdrives could cause damages...?
I agree, It would be ludicrous for him to refund people for what they have already bought.
also I took the analogy that it wasn't cigarettes but more it works on my setup guys everything is fine and kosher aka confirmational bias. Many people smoke cigarettes and don't get cancer, but it certainly increases the chances of it.
also I took the analogy that it wasn't cigarettes but more it works on my setup guys everything is fine and kosher aka confirmational bias. Many people smoke cigarettes and don't get cancer, but it certainly increases the chances of it.
Re: Everdrives could cause damages...?
If the risk of damage is due to excess current through the input diodes, would an ok/acceptable fix (since we can't send them back to be fixed) be to replace the resistor arrays with higher value parts?
-
ChuChu Flamingo
- Posts: 293
- Joined: Sun Feb 19, 2012 9:32 am
- Location: United States
Re: Everdrives could cause damages...?
I think rene talked about this on retro gaming roundtable and the answer is yes can modify these carts to have all I/O converted to 3.3v, but it would look like shit.
Re: Everdrives could cause damages...?
I'm just suggesting to replace the input resistors with higher value ones. It would look identical if soldered properly.
I'm guessing the podcast reference is talking about modifying the carts to include proper voltage level translation chips, which would indeed look like shit.
I'm guessing the podcast reference is talking about modifying the carts to include proper voltage level translation chips, which would indeed look like shit.
-
- Posts: 508
- Joined: Sun May 12, 2013 5:03 pm
Re: Everdrives could cause damages...?
Ludicrous maybe but also something you accept as a business when you knowingly release a product you may need to recall or offer repairs on.ChuChu Flamingo wrote:I agree, It would be ludicrous for him to refund people for what they have already bought.
also I took the analogy that it wasn't cigarettes but more it works on my setup guys everything is fine and kosher aka confirmational bias. Many people smoke cigarettes and don't get cancer, but it certainly increases the chances of it.
This certainly shouldn't be ignored or brushed off just because he's not a big corporation and consoles haven't started dropping like flies. (I'm not accusing anyone of this, only stating what I think.)
Re: Everdrives could cause damages...?
As in the mod would look like shit? If it's inside the cartridge (i.e. just mod the board) would anyone really care?ChuChu Flamingo wrote:I think rene talked about this on retro gaming roundtable and the answer is yes can modify these carts to have all I/O converted to 3.3v, but it would look like shit.
-
mikejmoffitt
- Posts: 629
- Joined: Fri Jan 08, 2016 7:26 am
- Location: Tokyo, Japan
Re: Everdrives could cause damages...?
The really scary shit is the 161-in-1 and other related Neo-Geo carts.
![Image](http://daifukkat.su/stgt/2017/banners/birdland_bois.png)
-
- Posts: 677
- Joined: Wed Aug 16, 2006 3:52 am
- Location: https://www.youtube.com/watch?v=4FZcI8EVW-c
Re: Everdrives could cause damages...?
.
Last edited by Arasoi on Sat Jun 20, 2020 10:46 am, edited 1 time in total.
Re: Everdrives could cause damages...?
IIRC, during a review that GameTech did about a clone toploader, the included multicart specifically said it would not function on real hardware. What do you wanna bet they're feeding the voltage directly to the chips on there too?
Re: Everdrives could cause damages...?
Yup, I heard about the two above, and it's really common on a lot of china bootlegs, too. I never realised this was an issue with Everdrives, and this is the first time I've ever heard of it. Is it only now that people discovered it?
It's common knowledge in the NES homebrew community that using 3v components in cartridges is bad, so this is really poor form. You can probably use it for years and years with no issue, but knowing this I would definitely never buy one.
It's common knowledge in the NES homebrew community that using 3v components in cartridges is bad, so this is really poor form. You can probably use it for years and years with no issue, but knowing this I would definitely never buy one.
Re: Everdrives could cause damages...?
I wouldn't care if it had wires all over it for an extra piece of mind. Out of interest, what would potentially fail on the console end, I take it wouldn't always be the same part or some cheap fuse?lechu wrote:As in the mod would look like shit? If it's inside the cartridge (i.e. just mod the board) would anyone really care?ChuChu Flamingo wrote:I think rene talked about this on retro gaming roundtable and the answer is yes can modify these carts to have all I/O converted to 3.3v, but it would look like shit.
-
citrus3000psi
- Posts: 668
- Joined: Wed Dec 25, 2013 11:56 pm
- Location: Indiana
Re: Everdrives could cause damages...?
A lot of different parts could be at risk.Gunstar wrote:I wouldn't care if it had wires all over it for an extra piece of mind. Out of interest, what would potentially fail on the console end, I take it wouldn't always be the same part or some cheap fuse?lechu wrote:As in the mod would look like shit? If it's inside the cartridge (i.e. just mod the board) would anyone really care?ChuChu Flamingo wrote:I think rene talked about this on retro gaming roundtable and the answer is yes can modify these carts to have all I/O converted to 3.3v, but it would look like shit.
I'm honestly not worried. But if I was plugging my everdrive into LaserDisc Pac or Wondermega, it might make me thing twice.
Re: Everdrives could cause damages...?
So glad I haven't bought any Everdrives yet.
When is the GB[C] ED and N64 ED getting savestates?
When is the GB[C] ED and N64 ED getting savestates?
Re: Everdrives could cause damages...?
FYI. NeoSD wrote the following following to my ask about the Neo Geo multicart (given neo geo is 5V and the flash they use is 3.3v):
NeoSD uses voltage translators to convert all the cart 5V signals into 3.3V for internal use and back. Also those translators have a fairly high ESD protection rating (they exceed the JEDEC standard rating), so they also protect the internal circutry from electrostatic discharge from the cartridge connector.
NeoSD uses voltage translators to convert all the cart 5V signals into 3.3V for internal use and back. Also those translators have a fairly high ESD protection rating (they exceed the JEDEC standard rating), so they also protect the internal circutry from electrostatic discharge from the cartridge connector.
Re: Everdrives could cause damages...?
Not all of them have the design issue though...GeneraLight wrote:So glad I haven't bought any Everdrives yet.
Re: Everdrives could cause damages...?
So for me the two everdrives incriminated are : the turbo everdrive and the mega everdrive V2 (X7), using them since 2013 nothing to report for now...well damages could be there or not...maybe my consoles will keep up until another thing would affect or this would be caused by everdrives ?
Who could tells
We need bigger tests, on very large scales to determinate if these products could affect consoles immediatly, or in the near future
For now Krikkz seems to have included this fact on his newers versions (well the versions who will comes...) just hope the multi neo & cie would not gives headhache to their owners
I think the DarkSoft one is safe...![Cool 8)](./images/smilies/icon_cool.gif)
Who could tells
We need bigger tests, on very large scales to determinate if these products could affect consoles immediatly, or in the near future
For now Krikkz seems to have included this fact on his newers versions (well the versions who will comes...) just hope the multi neo & cie would not gives headhache to their owners
I think the DarkSoft one is safe...
![Cool 8)](./images/smilies/icon_cool.gif)
Re: Everdrives could cause damages...?
I think we can rule that out, based on the fact that there are no reports of consoles that got damaged by an Everdrive. There may be problems on the long run, or maybe it's all fine.fafangus wrote:We need bigger tests, on very large scales to determinate if these products could affect consoles immediatly, or in the near future
It's good to point out flaws like this, but personally I'm not too worried about my Super Everdrive.
-
citrus3000psi
- Posts: 668
- Joined: Wed Dec 25, 2013 11:56 pm
- Location: Indiana
Re: Everdrives could cause damages...?
blizzz wrote:I think we can rule that out, based on the fact that there are no reports of consoles that got damaged by an Everdrive. There may be problems on the long run, or maybe it's all fine.fafangus wrote:We need bigger tests, on very large scales to determinate if these products could affect consoles immediatly, or in the near future
It's good to point out flaws like this, but personally I'm not too worried about my Super Everdrive.
Some consoles might have died, we don't really know. Users would chalk it up to the these machines be 25+ years old and not blame the everdrive.
Re: Everdrives could cause damages...?
I had a Sega Genesis model 1 that was working fine until I used a mega ever drive and then it died (still powered on, no picture). Could’ve been anything I guess, but this thread has me thinking twice.
citrus3000psi wrote:blizzz wrote:I think we can rule that out, based on the fact that there are no reports of consoles that got damaged by an Everdrive. There may be problems on the long run, or maybe it's all fine.fafangus wrote:We need bigger tests, on very large scales to determinate if these products could affect consoles immediatly, or in the near future
It's good to point out flaws like this, but personally I'm not too worried about my Super Everdrive.
Some consoles might have died, we don't really know. Users would chalk it up to the these machines be 25+ years old and not blame the everdrive.
Re: Everdrives could cause damages...?
I've been saying all this time the SD2SNES was better than the Super Everdrive.
-
ChuChu Flamingo
- Posts: 293
- Joined: Sun Feb 19, 2012 9:32 am
- Location: United States
Re: Everdrives could cause damages...?
dude its pure gold it can't get better than that. All other flash carts get wrecked son.opt2not wrote:I've been saying all this time the SD2SNES was better than the Super Everdrive.
Re: Everdrives could cause damages...?
Exactly what I was thinking. Heck, that'd be the first thing that came to my mind.citrus3000psi wrote:blizzz wrote:I think we can rule that out, based on the fact that there are no reports of consoles that got damaged by an Everdrive. There may be problems on the long run, or maybe it's all fine.fafangus wrote:We need bigger tests, on very large scales to determinate if these products could affect consoles immediatly, or in the near future
It's good to point out flaws like this, but personally I'm not too worried about my Super Everdrive.
Some consoles might have died, we don't really know. Users would chalk it up to the these machines be 25+ years old and not blame the everdrive.
I don't think I saw it mentioned, but does anyone know if this effects repro carts too?
Re: Everdrives could cause damages...?
It would be on a case-by-case basis depending on the repro cart design. In theory, a repro/homebrew cart can be as bad as the worst console-killing multicarts. Take that 8-bit music power cart for example, it fed 5v directly to the 3.3v flash. That's a recipe for a quick death for the console.