Cab measurements question

The place for all discussion on gaming hardware
Post Reply
User avatar
it290
Posts: 2849
Joined: Thu Mar 17, 2005 1:00 am
Location: polar malortex, illinois

Cab measurements question

Post by it290 »

Hello peeps,

Can one of you candy cab owners please give me a measurement from the ground to the top of the control panel? I'm planning on trimming the legs on the table that I use for my tate setup and I want to find a good height to start from without too much guesswork. Thanks.
Image
We here shall not rest until we have made a drawing-room of your shaft, and if you do not all finally go down to your doom in patent-leather shoes, then you shall not go at all.
Top
User avatar
elvis
Posts: 984
Joined: Fri Nov 04, 2005 10:42 pm
Location: Brisbane, Australia

Post by elvis »

Exactly 670mm (26.4 inches) on our LS-Sound-29 cabs.
Top
User avatar
Dave_K.
Posts: 4571
Joined: Wed Jan 26, 2005 5:43 am
Location: SF Bay Area
Contact:
Contact Dave_K.

Post by Dave_K. »

In contrast, Astro City is 25.5 inches from ground to top of panel.
Top
User avatar
it290
Posts: 2849
Joined: Thu Mar 17, 2005 1:00 am
Location: polar malortex, illinois

Post by it290 »

Thanks guys.
Image
We here shall not rest until we have made a drawing-room of your shaft, and if you do not all finally go down to your doom in patent-leather shoes, then you shall not go at all.
Top
zakk
Posts: 1410
Joined: Wed Jan 26, 2005 6:04 am
Location: New York, NY
Contact:
Contact zakk

Post by zakk »

A namco exceleena 2 (red) is 29 inches. Taito Egret 1 is 25.5
Top
User avatar
Dave_K.
Posts: 4571
Joined: Wed Jan 26, 2005 5:43 am
Location: SF Bay Area
Contact:
Contact Dave_K.

Post by Dave_K. »

I got 29-1/4" on my exceleena blue (maybe because of the feet). Konami Windys are 25-1/4"
Top
zakk
Posts: 1410
Joined: Wed Jan 26, 2005 6:04 am
Location: New York, NY
Contact:
Contact zakk

Post by zakk »

I never realized how high the exceleena panel was until I put it next to my egret. It's just high enough that I can't use the same stool for both cabs.
Top
User avatar
Dave_K.
Posts: 4571
Joined: Wed Jan 26, 2005 5:43 am
Location: SF Bay Area
Contact:
Contact Dave_K.

Post by Dave_K. »

zakk wrote:I never realized how high the exceleena panel was until I put it next to my egret. It's just high enough that I can't use the same stool for both cabs.
LOL! same with me. For my exceleena, I'm using a nice office desk chair with the back removed, so its like an adjustable stool, set at the highest it can go.
Top
Post Reply

Return to “Hardware”