It has plexi, I just suck at taking picturespowerfuran wrote:Very nice. I see it doesn't have a plexi panel on top of it, how did you print the artwork and does it have some sort of plastic finish to prevent scratching?harrytasker wrote:HORI RAP V, sanwa buttons+balltop.
Custom Sticks Thread!!
-
harrytasker
- Posts: 27
- Joined: Mon Dec 12, 2016 8:15 pm
Re: Custom Sticks Thread!!
Re: Custom Sticks Thread!!
Got the PS/PS2 cord last week for my pcb.
I can confirm that Strikers 1945 for the PS (the one that is really Strikers II) will not work with the PS360+ on either console.
Seems to be an issue with the game itself as my other PS games work with it.
I can confirm that Strikers 1945 for the PS (the one that is really Strikers II) will not work with the PS360+ on either console.
Seems to be an issue with the game itself as my other PS games work with it.
You're sure to be in a fine haze about now, but don't think too hard about all of this. Just go out and kill a few beasts. It's for your own good. You know, it's just what hunters do! You'll get used to it.
Re: Custom Sticks Thread!!
I saw this on ebay and was curious about it for making a lower cost PC stick. Glad to hear that it works, and at least the delay isn't noticeable though hard to believe it is zero. Thanks for the detailed post about it, very helpful!powerfuran wrote:So I bought this very generic zero delay pcb from Amazon Italy...
...
How would you orient the joystick if it didn't have the 5-pin connector?
-
powerfuran
- Posts: 177
- Joined: Wed May 03, 2006 2:00 pm
- Location: Italy
- Contact:
Re: Custom Sticks Thread!!
Sticks with no pcb can be oriented which way you want, it wouldn't make any difference. The only thing is that you would not use the 5-pin connector at all, instead you need to use the 4 separate connectors which you can see highlighted in red here:kaiza wrote:
How would you orient the joystick if it didn't have the 5-pin connector?
free image upload
Of course the connectors need to have the larger 0.187 quick disconnects which don't come with this specific kit but you can easily make your own connectors. I am actually working on this because I have another stick which uses a non-PCB LS-32 stick and I plan to use this same Zero Delay model.
Re: Custom Sticks Thread!!
Not quite a fight stick, this was a fully enclosed Raspberry Pi console with hdmi out, a side input for a second player an a rechargeable battery.
Here's my latest a solid walnut case for modern consoles and PC.
My next project will use the PS360+ and I'll use it for dreamcast fighting games.
-
powerfuran
- Posts: 177
- Joined: Wed May 03, 2006 2:00 pm
- Location: Italy
- Contact:
Re: Custom Sticks Thread!!
Impressivemheyman wrote:snip
I love the Sega button layout on both sticks. Mind to share a pic of the internals of the Raspberry Pi stick?
Re: Custom Sticks Thread!!
I might be able to open it up later for some pictures. i do have a little diagram I made while putting it together.powerfuran wrote:Impressivemheyman wrote:snip
I love the Sega button layout on both sticks. Mind to share a pic of the internals of the Raspberry Pi stick?
It's not included on here but I ended up panel mounting a DC jack and wiring that to the charging circuit. Also the buttons are wired into an Ultimarc I-Pac which plugs into the usb of the Pi. I didn't want to bother with the gpio and honestly didn't know how when I took on this project.
-
powerfuran
- Posts: 177
- Joined: Wed May 03, 2006 2:00 pm
- Location: Italy
- Contact:
Re: Custom Sticks Thread!!
Very nice rig. Did you make the case yourself or can you find those larger cases online?
Now for something a lot easier, I have upgraded my old Agetech with new artwork and plexi from Tek-Innovations and installed another zero delay pcb, works perfectly with steam for me. I love these solderless kits.
Now for something a lot easier, I have upgraded my old Agetech with new artwork and plexi from Tek-Innovations and installed another zero delay pcb, works perfectly with steam for me. I love these solderless kits.
Re: Custom Sticks Thread!!
Thanks! I made the cases myself. I was actually working on a tutorial to make one but never ended up finishing it.
-
- Posts: 139
- Joined: Thu Mar 02, 2017 11:01 am
Re: Custom Sticks Thread!!
hey, powerfuran
Now I see you talk about ZeroDelay PCBs, do you know of a reliable solution for playing on any console? I mean, what if I wanted to use a ZeroDelay custom stick in PlayStation 2?
Now I see you talk about ZeroDelay PCBs, do you know of a reliable solution for playing on any console? I mean, what if I wanted to use a ZeroDelay custom stick in PlayStation 2?
-
powerfuran
- Posts: 177
- Joined: Wed May 03, 2006 2:00 pm
- Location: Italy
- Contact:
Re: Custom Sticks Thread!!
I don't have any multi-console needs atm so I haven't really investigated that, but from what I can see on srk the best multi-console board is still the Toodles Chtulu which I don't know if it is still available in the market at all. The only thing with that is that you need to make your own console cables using the RJ45 standard, you can see some pictures and examples here.DiegoPonga wrote:hey, powerfuran
Now I see you talk about ZeroDelay PCBs, do you know of a reliable solution for playing on any console? I mean, what if I wanted to use a ZeroDelay custom stick in PlayStation 2?
http://www.hobbyforever.fr/Dual-mod-Mad ... _a921.html
There might be other options available now that I don't know about though...
-
charlie chong
- Posts: 1517
- Joined: Fri Dec 08, 2006 12:19 pm
- Location: borders
Re: Custom Sticks Thread!!
gonna be rigging up a rgb mame setup and got a good deal on a couple of sticks/cases and had a few lying round so i thought i'd buy/mess around with
various sticks i got and after market mods and try and find what is the best stick for me.i've always
had trouble with minute tap dodging on stock jlf and ls32 so i'm hoping to find something that will improve that for me.
the suzo is good for tap dodging but i find them rubbish for diagonals(mebbes just the sticks at casino were busted but i didn't like them)
got the following sticks available
Seimitsu LS-40-01 x1
Seimitsu LS-56-01 x1
Seimitsu LS-32-01 x2
Sanwa jlf x3
and these after market mods
KOWAL™ 1mm Oversize Actuators for Sanwa JLF Series Joysticks
KOWAL Flat Plate Converters
KOWAL LS-32 Octopus Octagonal Restrictor Gate
2lb Tension Springs For Sanwa JLF Series Joysticks
4lb Tension Spring For Sanwa JLF Series Joysticks
KOWAL LS.ST Short Throw Mod for Seimitsu LS-55/56/58/60-01 Joystick
(Size: LS-56, LS-58, LS-60 (4 x 25mm Screws))
Seimitsu ls-56 Octagonal Gate
Sanwa GT-Y Octagonal Restrictor Gate
anyways i'll mess about with the sticks and various possible combinations over the next
few days and let you know...gasp
my opinions..
various sticks i got and after market mods and try and find what is the best stick for me.i've always
had trouble with minute tap dodging on stock jlf and ls32 so i'm hoping to find something that will improve that for me.
the suzo is good for tap dodging but i find them rubbish for diagonals(mebbes just the sticks at casino were busted but i didn't like them)
got the following sticks available
Seimitsu LS-40-01 x1
Seimitsu LS-56-01 x1
Seimitsu LS-32-01 x2
Sanwa jlf x3
and these after market mods
KOWAL™ 1mm Oversize Actuators for Sanwa JLF Series Joysticks
KOWAL Flat Plate Converters
KOWAL LS-32 Octopus Octagonal Restrictor Gate
2lb Tension Springs For Sanwa JLF Series Joysticks
4lb Tension Spring For Sanwa JLF Series Joysticks
KOWAL LS.ST Short Throw Mod for Seimitsu LS-55/56/58/60-01 Joystick
(Size: LS-56, LS-58, LS-60 (4 x 25mm Screws))
Seimitsu ls-56 Octagonal Gate
Sanwa GT-Y Octagonal Restrictor Gate
anyways i'll mess about with the sticks and various possible combinations over the next
few days and let you know...gasp
my opinions..
SLAG OFF KETSUI I SLAG OFF YOR MUM
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
Re: Custom Sticks Thread!!
That's a healthy load of stuff for your arcade pleasure.
I didn't know there was a mod to shorten the throw of the LS-56 - it is already pretty damn short as it is btw, the LS-58/LS-56 with lighter spring is my favourite lever among microswitched ones. Let us know what you end up preferring and maybe post a pic of your weapon ^^
I didn't know there was a mod to shorten the throw of the LS-56 - it is already pretty damn short as it is btw, the LS-58/LS-56 with lighter spring is my favourite lever among microswitched ones. Let us know what you end up preferring and maybe post a pic of your weapon ^^
-
charlie chong
- Posts: 1517
- Joined: Fri Dec 08, 2006 12:19 pm
- Location: borders
Re: Custom Sticks Thread!!
will post pics of the sticks at the end when i decide all the final resting places after testing
ROUND 1
sanwa jlf+ 1MM OVERSIZE ACTUATORRR + 4LB SPRING VS sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING
FIGHT!!!!1
both mods were mounted in a qanba q4 and mushimesama 1.5 black label original was played as i am fairly
consistent at the game and it the playstyle has lots of screen sweeps,twitching,sweeping boss tap dodges from left to right
and up and down/diagonal movements for point blanking so is a good test for a stick.i tried the octagonal gate but been using
square gates for years and it just felt weird so went back to the square gate.
sanwa+ 1MM OVERSIZE ACTUATORRR + 4LB SPRING
horrible.. much too stiff and the diagonals are really dodgy much like a suzo..if you like suzo then
i guess you might like this mod combo.. i hated it.good tap dodging tho.
might try sticking the spring in a ls-32 at a later date and see what that's like.
sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING
straight away this felt right..smooth with the right amount of tightness,short throw and none of the grindy metal feel you get with a ls-32.
tap dodges,diagonals ,sweeps all feel nice and the spring returns to center with a nice snap..
round one winner= sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING
only the first test but hard to imagine a stick feeling nicer than this.. will carry on tho and we will see
next up
qanba with sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING VS madcatz t.e with stock ls-40
ROUND 1
sanwa jlf+ 1MM OVERSIZE ACTUATORRR + 4LB SPRING VS sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING
FIGHT!!!!1
both mods were mounted in a qanba q4 and mushimesama 1.5 black label original was played as i am fairly
consistent at the game and it the playstyle has lots of screen sweeps,twitching,sweeping boss tap dodges from left to right
and up and down/diagonal movements for point blanking so is a good test for a stick.i tried the octagonal gate but been using
square gates for years and it just felt weird so went back to the square gate.
sanwa+ 1MM OVERSIZE ACTUATORRR + 4LB SPRING
horrible.. much too stiff and the diagonals are really dodgy much like a suzo..if you like suzo then
i guess you might like this mod combo.. i hated it.good tap dodging tho.
might try sticking the spring in a ls-32 at a later date and see what that's like.
sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING
straight away this felt right..smooth with the right amount of tightness,short throw and none of the grindy metal feel you get with a ls-32.
tap dodges,diagonals ,sweeps all feel nice and the spring returns to center with a nice snap..
round one winner= sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING
only the first test but hard to imagine a stick feeling nicer than this.. will carry on tho and we will see
next up
qanba with sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING VS madcatz t.e with stock ls-40
SLAG OFF KETSUI I SLAG OFF YOR MUM
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
-
charlie chong
- Posts: 1517
- Joined: Fri Dec 08, 2006 12:19 pm
- Location: borders
Re: Custom Sticks Thread!!
Qanba with sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING VS Madcatz t.e with stock ls-40
round 2..... fyght!!!!
obviously my thoughts on the sanwa with mod will still be the same so will just give my thoughts
on whether i think the stock ls-40 is better or worse overall than the modded sanwa and how it compares
to others i know and use like the ls-32
engage is short as is the throw and shaft length.. the spring feels a tad stiffer than a ls-32
too.definitely less sloppy feeling than a ls-32 but still has that metal grindy feel when hitting the switches/going up
against the gate.overall a good stick but not as good for me as the modded sanwa as it feels slightly less precise coupled with the grindy feel..
winner
sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING
next UP
ls-56 (stock) VS ls56-short throw mod(1 riser) VS LS56-short throw mod(2 riser2)
round 2..... fyght!!!!
obviously my thoughts on the sanwa with mod will still be the same so will just give my thoughts
on whether i think the stock ls-40 is better or worse overall than the modded sanwa and how it compares
to others i know and use like the ls-32
engage is short as is the throw and shaft length.. the spring feels a tad stiffer than a ls-32
too.definitely less sloppy feeling than a ls-32 but still has that metal grindy feel when hitting the switches/going up
against the gate.overall a good stick but not as good for me as the modded sanwa as it feels slightly less precise coupled with the grindy feel..
winner
sanwa jlf+ 1MM OVERSIZE ACTUATOR + 2LB SPRING
next UP
ls-56 (stock) VS ls56-short throw mod(1 riser) VS LS56-short throw mod(2 riser2)
SLAG OFF KETSUI I SLAG OFF YOR MUM
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
-
charlie chong
- Posts: 1517
- Joined: Fri Dec 08, 2006 12:19 pm
- Location: borders
Re: Custom Sticks Thread!!
for this i mounted the ls-56 in a razer atrox case as i was gonna be switching the parts 3
tiems and this stick has a flip top lid allowing for easy access
i played progear on mame
ls-56-01 stock
spring seems looser than ls32 or 40.throw is shorter.people rate this stick stock but i prefer
the ls32 and 40 over this.. diagonals seem a bit sloppy for me.
LS56-01 (KOWAL SHORT THROW MOD 1 RISER)
adding one riser instantly tightened the stick up a bit as well as shortening engage
times and throw distance and made it feel pretty much exactly the same as the ls-40 so feel much the same as i do about that..
ls56-01 (KOWAL SHORT THROW MOD 2 RISER)
made the stick feel a bit stiffer and again shortens engage and distance even more.this
makes the stick even nicer and has the most smooth/least grindy feel for a seimitsu that i
have felt so far. this for me is the next nicest after the sanwa with oversize actuator and 2 pound spring...
so my personal results in order i favour for shooters (not tested fighters)
stock sticks
1.ls-40
2.ls-32
3.ls-56
4.sanwa jlf
modded sticks
1.sanwa jlf with oversize actuator and 2 pound spring
2.ls-56 KOWAL SHORT THROW MOD 2 RISER
3.ls-56 KOWAL SHORT THROW MOD 1 RISER
4.sanwa jlf with oversize actuator and 4 pound spring
overall
1.sanwa jlf with oversize actuator and 2 pound spring
2.ls-56 KOWAL SHORT THROW MOD 2 RISER
3.ls-56 KOWAL SHORT THROW MOD 1 RISER +ls40 (stock)
4.ls-32 (stock)
5.ls-56 (stock)
6.sanwa jlf (stock)
7.sanwa jlf with oversize actuator and 4 pound spring
so if you like stiff smooth sticks (teh ladiez choice) and have a jlf lying around then it
might be worth the £4 investment in the oversize actuator and spring..
tiems and this stick has a flip top lid allowing for easy access
i played progear on mame
ls-56-01 stock
spring seems looser than ls32 or 40.throw is shorter.people rate this stick stock but i prefer
the ls32 and 40 over this.. diagonals seem a bit sloppy for me.
LS56-01 (KOWAL SHORT THROW MOD 1 RISER)
adding one riser instantly tightened the stick up a bit as well as shortening engage
times and throw distance and made it feel pretty much exactly the same as the ls-40 so feel much the same as i do about that..
ls56-01 (KOWAL SHORT THROW MOD 2 RISER)
made the stick feel a bit stiffer and again shortens engage and distance even more.this
makes the stick even nicer and has the most smooth/least grindy feel for a seimitsu that i
have felt so far. this for me is the next nicest after the sanwa with oversize actuator and 2 pound spring...
so my personal results in order i favour for shooters (not tested fighters)
stock sticks
1.ls-40
2.ls-32
3.ls-56
4.sanwa jlf
modded sticks
1.sanwa jlf with oversize actuator and 2 pound spring
2.ls-56 KOWAL SHORT THROW MOD 2 RISER
3.ls-56 KOWAL SHORT THROW MOD 1 RISER
4.sanwa jlf with oversize actuator and 4 pound spring
overall
1.sanwa jlf with oversize actuator and 2 pound spring
2.ls-56 KOWAL SHORT THROW MOD 2 RISER
3.ls-56 KOWAL SHORT THROW MOD 1 RISER +ls40 (stock)
4.ls-32 (stock)
5.ls-56 (stock)
6.sanwa jlf (stock)
7.sanwa jlf with oversize actuator and 4 pound spring
so if you like stiff smooth sticks (teh ladiez choice) and have a jlf lying around then it
might be worth the £4 investment in the oversize actuator and spring..
Last edited by charlie chong on Wed Jun 28, 2017 9:30 am, edited 2 times in total.
SLAG OFF KETSUI I SLAG OFF YOR MUM
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
Re: Custom Sticks Thread!!
Agree, the JLF with those exact mods feel perfect to me too. The spring can be original, I guess, I don't mind the easier action.
| My games - http://www.emphatic.se | (Click) I have YEN stickers for sale
RegalSin wrote:Street Fighters. We need to aviod them when we activate time accellerator.
-
charlie chong
- Posts: 1517
- Joined: Fri Dec 08, 2006 12:19 pm
- Location: borders
Re: Custom Sticks Thread!!
i'm gonna try the og spring in the atrox as it feels a bit stiff
here's my stix
saturn padhack,semitsu ls-40 sanwa buttons
zero delay ps1/2/3/pc,seimitsu ls32/seimitsu buttons
zero delay usb pcb modded sanwa jlf/sanwa buttons.autofire buttons in the case
360/pc te modded sanwa jlf,seimitsu buttons,sticker covering crack mod
ps3/360/pc qanba .modded sanwa jlf, sanwa button
here's my stix
saturn padhack,semitsu ls-40 sanwa buttons
zero delay ps1/2/3/pc,seimitsu ls32/seimitsu buttons
zero delay usb pcb modded sanwa jlf/sanwa buttons.autofire buttons in the case
360/pc te modded sanwa jlf,seimitsu buttons,sticker covering crack mod
ps3/360/pc qanba .modded sanwa jlf, sanwa button
SLAG OFF KETSUI I SLAG OFF YOR MUM
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
https://soundcloud.com/vapor-teh-apparition
https://soundcloud.com/don-pachi-aka-bling-laden
Re: Custom Sticks Thread!!
I couldnt find any template for my arcade stick, so I did something with Paint. It's laughtable, but its a way to get an idea and choose a image. Maybe I'll print and use contact, idk.
Never saw a mod of that one anyway
Spoiler
-
powerfuran
- Posts: 177
- Joined: Wed May 03, 2006 2:00 pm
- Location: Italy
- Contact:
Re: Custom Sticks Thread!!
Those are dope.
What do you have under the hood of the goblin and the 136?
What do you have under the hood of the goblin and the 136?
You're sure to be in a fine haze about now, but don't think too hard about all of this. Just go out and kill a few beasts. It's for your own good. You know, it's just what hunters do! You'll get used to it.
-
powerfuran
- Posts: 177
- Joined: Wed May 03, 2006 2:00 pm
- Location: Italy
- Contact:
Re: Custom Sticks Thread!!
Thanks Stevens. All 3 sticks have the same cheap USB encoder: https://www.amazon.it/XCSOURCE-ritardo- ... sb+encoderStevens wrote:Those are dope.
What do you have under the hood of the goblin and the 136?
It works fine and the autofire is a nice addition. However I feel that sooner or later they will crap out on me. They do look cheap. I still have some PS1 padhacks laying around but for now I am using the sticks only on Steam and the USB encoder works flawlessly.
Re: Custom Sticks Thread!!
Greetings chaps,
Any Mushi fans? Just finished this build as the art came in.
Cheers
Any Mushi fans? Just finished this build as the art came in.
Cheers
Re: Custom Sticks Thread!!
Just needed to move the artwork a little bit down and to the left ..
Re: Custom Sticks Thread!!
Oh? I guess I done goofedUdderdude wrote:Just needed to move the artwork a little bit down and to the left ..
I tried it, I don't like the junk that comes into the frame at the top, body parts of a character you can't see, small patches of blue sky that are no where else in the image, this stuff was a deal breaker. Reco's face is also too close to the buttons for my tastes, no room to breath. This crop was about framing the best shot of her in the top rectangle shaped window above the buttons. The only consolation I had to make was cutting off her annoyingly tall hat.
I spent a good hour on this crop moving it around and re-sampling it, it was a tricky one but it was either this or not using it, the original flyer is vertical, it was awkward either way cropping it for a horizontal image, especially with so many different characters in it. I was going to use more of the top to get the other character and the dragon, but the Queen ruined that because her lower half crept into the image as well.
If this were a print for a poster I would agree with your assessment, but on a stick, the cut outs make it awkward to achieve.
Thanks for the positive reply
Re: Custom Sticks Thread!!
Looks great! Nice alignment on the button art inserts, that always seems like the trickiest part. No purple balltop though?!
Re: Custom Sticks Thread!!
So far the only mod I did was swapping out a square gate for an octagonal gate on the F300, F500, and the Qanba Obsidian. Should look into custom artwork, especially for the Mayflash sticks, though I like the art on the Chun Li Hori RAP V for Switch too much to change it.
-
burnt_toast_600
- Posts: 3
- Joined: Thu Feb 25, 2021 12:08 pm
Re: Custom Sticks Thread!!
lovin the sticks I've seen so far... gonna read the thread in its enirety to check all that has been posted
Re: Custom Sticks Thread!!
Just built a new stick.
All Fight Sticks 16" case
Brook universal board
Seimitsu pearl buttons
Nobi pro silent lever
Astro city 2P side button layout
Can't recommend All Fight Sticks enough if you want to build something nice. It ends up being well more costly than a hori etc, but the quality, customisability and customer service via discord is totally worth it.
All Fight Sticks 16" case
Brook universal board
Seimitsu pearl buttons
Nobi pro silent lever
Astro city 2P side button layout