The Official Cool PCB You Just Got Thread!

Anything from run & guns to modern RPGs, what else do you play?
glstar
Posts: 33
Joined: Tue May 19, 2009 7:52 am

Re: The Official Cool PCB You Just Got Thread!

Post by glstar »

Finally got this beauty:
Image

With this one that's needed to test on bench, Nintendo Playchoice 10 (single or dual monitor) and VS Board....and Punchout too:
Image
User avatar
system11
Posts: 6273
Joined: Tue Jan 25, 2005 10:17 pm
Location: UK
Contact:

Re: The Official Cool PCB You Just Got Thread!

Post by system11 »

Has someone really cut 3 of the corners off on that Hero Tonma?

There is a hell for these people. It's commonly done to fit things into cocktail cabinets.
System11's random blog, with things - and stuff!
http://blog.system11.org
User avatar
waiwainl
Posts: 464
Joined: Tue Jun 24, 2014 9:23 am
Location: Netherlands

Re: The Official Cool PCB You Just Got Thread!

Post by waiwainl »

Nice Irem, actually didn't know about this one until now :)
Visit: https://shmu.ps
Experience the National Video Game Museum in the Netherlands
glstar
Posts: 33
Joined: Tue May 19, 2009 7:52 am

Re: The Official Cool PCB You Just Got Thread!

Post by glstar »

system11 wrote:Has someone really cut 3 of the corners off on that Hero Tonma?

There is a hell for these people. It's commonly done to fit things into cocktail cabinets.
I think this was done by the factory.
Even if i see some of this boards without the corners cutted.
User avatar
system11
Posts: 6273
Joined: Tue Jan 25, 2005 10:17 pm
Location: UK
Contact:

Re: The Official Cool PCB You Just Got Thread!

Post by system11 »

glstar wrote:
system11 wrote:Has someone really cut 3 of the corners off on that Hero Tonma?

There is a hell for these people. It's commonly done to fit things into cocktail cabinets.
I think this was done by the factory.
Even if i see some of this boards without the corners cutted.
No, they never shipped them like that. Operators do it to fit them in cocktail cabinets as I say.
System11's random blog, with things - and stuff!
http://blog.system11.org
User avatar
Bar81
Posts: 804
Joined: Sun May 22, 2005 4:25 pm

Re: The Official Cool PCB You Just Got Thread!

Post by Bar81 »

system11 wrote:Has someone really cut 3 of the corners off on that Hero Tonma?

There is a hell for these people.
hear hear! And for people who take cardboard box games and cut them up to fit in plastic cases.
User avatar
dingsbums
Posts: 277
Joined: Sun Feb 04, 2007 8:35 pm
Location: germany

Re: The Official Cool PCB You Just Got Thread!

Post by dingsbums »

PCBs of the last couple of months :D.

Image
https://twitter.com/Madstalker80
Skykid wrote: Get ready for the big bad world to fuck you up the ass in ways you never believed possible.
frsj8112
Posts: 53
Joined: Mon Oct 14, 2013 2:26 pm
Location: Sweden

Re: The Official Cool PCB You Just Got Thread!

Post by frsj8112 »

........
Last edited by frsj8112 on Wed Jun 14, 2017 11:01 pm, edited 1 time in total.
User avatar
RGB
Posts: 520
Joined: Sat Aug 04, 2007 3:11 pm
Location: Europe

Re: The Official Cool PCB You Just Got Thread!

Post by RGB »

Recent addition :)

Image
User avatar
Stompp
Posts: 384
Joined: Tue Sep 11, 2012 9:51 am
Location: Sweden

Re: The Official Cool PCB You Just Got Thread!

Post by Stompp »

It's been a long time since I bought a PCB and having to part with my DOJ kit before the summer getting hold of this one felt pretty good :D

Though, a couple of things I hope someone can help me sort out; the pop has a 1.5 logo but the marquee doesn't, the instruction strip is plain paper and not the usual sticker version and there's no 1.5 sticker. Are the marquee and instruction strip the correct ones and did some kits lack the sticker?

Moar pics

Image
User avatar
Skykid
Posts: 17646
Joined: Sun Nov 18, 2007 2:16 pm
Location: Planet Dust Asia

Re: The Official Cool PCB You Just Got Thread!

Post by Skykid »

All 1.5 kits came with a sticker. I'm not sure that the marquee had the 1.5 logo on it though, so don't worry about that. But the instruction strip being plain paper doesn't ring a bell. There was one Cave kit that did have a paper strip, and it might be Futari 1.5 - but fuzzy memory is telling me it was a normal laminated sticker.
Always outnumbered, never outgunned - No zuo no die

User avatar
monouchi
Posts: 800
Joined: Fri Jan 01, 2010 10:07 pm
Location: Sweden

Re: The Official Cool PCB You Just Got Thread!

Post by monouchi »

Futari 1.5 doesnt have a sticky strip. So it should be correct.

"Mushihimesama Futari ver 1.0/1.5:

- PCB (wrapped in a blue baggie w/ pink bubblewrap)
- PCB feet
- Instructions (monochrome)
- Instruction Strip (thin glossy paper - no sticker backing) "

http://shmups.system11.org/viewtopic.php?f=1&t=16727
User avatar
Skykid
Posts: 17646
Joined: Sun Nov 18, 2007 2:16 pm
Location: Planet Dust Asia

Re: The Official Cool PCB You Just Got Thread!

Post by Skykid »

Ah it is that one, thanks monouchi. I knew there was at least one kit with a budget strip, and 1.5 is it!
Always outnumbered, never outgunned - No zuo no die

User avatar
Stompp
Posts: 384
Joined: Tue Sep 11, 2012 9:51 am
Location: Sweden

Re: The Official Cool PCB You Just Got Thread!

Post by Stompp »

Ah! Thank you, guys :) So I'm a sticker and a blue baggie short then - oh well. Better that than the PCB ;) Enjoying playing the game immensely...even though I get my ass handed to me :mrgreen:
User avatar
Casey120
Posts: 1155
Joined: Fri Jun 05, 2009 9:15 am
Location: Holland

Re: The Official Cool PCB You Just Got Thread!

Post by Casey120 »

Stompp wrote:Ah! Thank you, guys :) So I'm a sticker and a blue baggie short then - oh well. Better that than the PCB ;) Enjoying playing the game immensely...even though I get my ass handed to me :mrgreen:
There´s an instruction card also, I think it explains where to put the stickers .
User avatar
ifog
Posts: 135
Joined: Wed Oct 01, 2008 12:23 pm
Location: Nice
Contact:

Re: The Official Cool PCB You Just Got Thread!

Post by ifog »

Namco Baraduke

Flyer

Image

The game is hard but it was not enough:
Default dip switch settings forbid "continue" ... :roll:
User avatar
system11
Posts: 6273
Joined: Tue Jan 25, 2005 10:17 pm
Location: UK
Contact:

Re: The Official Cool PCB You Just Got Thread!

Post by system11 »

System11's random blog, with things - and stuff!
http://blog.system11.org
User avatar
BIL
Posts: 18989
Joined: Thu May 10, 2007 12:39 pm
Location: COLONY

Re: The Official Cool PCB You Just Got Thread!

Post by BIL »

Thought the tab said "MAHJONG STOOOP" for a second. :mrgreen:

Sorry for the slight OT, but another post caught my eye - WTF @ this Pitney Bowes shit? First I've heard of it, sounds godawful. Thanks for the heads-up.
User avatar
AeroCityMayor
Posts: 219
Joined: Mon Aug 25, 2008 10:36 pm
Location: Wakefield, West Yorks, UK
Contact:

Re: The Official Cool PCB You Just Got Thread!

Post by AeroCityMayor »

system11 wrote:DON'T JUDGE ME!

http://blog.system11.org/?p=2058
Why ever not???

That's an awesome haul :mrgreen:
Image
Entity formerly known as alien_mame!
User avatar
d0s
Posts: 354
Joined: Fri May 09, 2014 11:01 pm
Location: South Florida
Contact:

Re: The Official Cool PCB You Just Got Thread!

Post by d0s »

went to japan for the first time last month, thought I could control myself until I walked into MAK

Image
User avatar
chempop
Posts: 3461
Joined: Sun Jul 31, 2005 7:44 am
Location: Western-MA USA

Re: The Official Cool PCB You Just Got Thread!

Post by chempop »

Congrats d0s, does get much better than that for a souvenir :D
"I've had quite a few pcbs of Fire Shark over time, and none of them cost me over £30 - so it won't break the bank by any standards." ~Malc
User avatar
waiwainl
Posts: 464
Joined: Tue Jun 24, 2014 9:23 am
Location: Netherlands

Re: The Official Cool PCB You Just Got Thread!

Post by waiwainl »

What game is this?
Visit: https://shmu.ps
Experience the National Video Game Museum in the Netherlands
User avatar
Xyga
Posts: 7181
Joined: Tue Nov 05, 2013 8:22 pm
Location: block

Re: The Official Cool PCB You Just Got Thread!

Post by Xyga »

You've probably never heard of it.
Strikers1945guy wrote:"Do we....eat chicken balls?!"
User avatar
monouchi
Posts: 800
Joined: Fri Jan 01, 2010 10:07 pm
Location: Sweden

Re: The Official Cool PCB You Just Got Thread!

Post by monouchi »

Thats mean. :)

waiwainl: Check the sticker close to the Jamma edge, DDP stands for Dodonpachi, JP ver with the ATLUS logo.

Very nice buy d0s.
User avatar
Xyga
Posts: 7181
Joined: Tue Nov 05, 2013 8:22 pm
Location: block

Re: The Official Cool PCB You Just Got Thread!

Post by Xyga »

I mean posting a picture of a bare pcb without telling which game it is very much the hipster essence of this thread.
Strikers1945guy wrote:"Do we....eat chicken balls?!"
User avatar
Stompp
Posts: 384
Joined: Tue Sep 11, 2012 9:51 am
Location: Sweden

Re: The Official Cool PCB You Just Got Thread!

Post by Stompp »

Xyga wrote:I mean posting a picture of a bare pcb without telling which game it is very much the hipster essence of this thread.
:mrgreen:
User avatar
waiwainl
Posts: 464
Joined: Tue Jun 24, 2014 9:23 am
Location: Netherlands

Re: The Official Cool PCB You Just Got Thread!

Post by waiwainl »

Xyga wrote:You've probably never heard of it.
I actually have DDP - just the int version, which has a different PCB layout and I missed the obvious sticker :-)
Visit: https://shmu.ps
Experience the National Video Game Museum in the Netherlands
User avatar
monouchi
Posts: 800
Joined: Fri Jan 01, 2010 10:07 pm
Location: Sweden

Re: The Official Cool PCB You Just Got Thread!

Post by monouchi »

waiwainl wrote:
Xyga wrote:You've probably never heard of it.
I actually have DDP - just the int version, which has a different PCB layout and I missed the obvious sticker :-)
Hm, I always thought the Int and JP had the same layout? Only diff was the Atlus logo?
User avatar
dingsbums
Posts: 277
Joined: Sun Feb 04, 2007 8:35 pm
Location: germany

Re: The Official Cool PCB You Just Got Thread!

Post by dingsbums »

Early christmas present :D .

Image
Image
Last edited by dingsbums on Fri Dec 23, 2016 11:04 am, edited 1 time in total.
https://twitter.com/Madstalker80
Skykid wrote: Get ready for the big bad world to fuck you up the ass in ways you never believed possible.
Post Reply