With matt absent, I need some RGB cables.

The place for all discussion on gaming hardware
Post Reply
thchardcore
Posts: 483
Joined: Wed Jun 22, 2005 9:20 am
Location: Liberal cesspool

With matt absent, I need some RGB cables.

Post by thchardcore »

I bought a 1084d and It has a male db9 on it. Mono sound. I need cables for this really bad.

If anyone else makes them please help me!
A camel is a horse designed by a committee
Top
User avatar
D
Posts: 3744
Joined: Tue Feb 01, 2005 3:49 pm
Location: Almere, Netherlands
Contact:
Contact D

Post by D »

Search the net for pinouts.
buy soldering iron
get cracking

Just do it.

We will help you through it, all of us
Top
PC Engine Fan X!
Posts: 8455
Joined: Wed Jan 26, 2005 10:32 pm

Re: With matt absent, I need some RGB cables.

Post by PC Engine Fan X! »

thchardcore wrote:I bought a 1084d and It has a male db9 on it. Mono sound. I need cables for this really bad.

If anyone else makes them please help me!
I've got an Amiga Commodor3 1080 14" RGB monitor with the same pinout. If you don't want to solder, then use a solderless wire crimp to link up a pre-wired DB-9 to the RGB cable of your choice. It isn't that hard to do...just match up the Red, Blue, Green, Horizontal/Vertical Sync & Ground...and volia, you have the best analog RGB connect on your new 1084D monitor.

PC Engine Fan X! ^_~
Top
thchardcore
Posts: 483
Joined: Wed Jun 22, 2005 9:20 am
Location: Liberal cesspool

Post by thchardcore »

Except adding resistors/lm8118 for the rgb lines for n64 and snes.
A camel is a horse designed by a committee
Top
Post Reply

Return to “Hardware”