Emotia and Intel HD3000

The place for all discussion on gaming hardware
Post Reply
User avatar
kowal
Posts: 122
Joined: Wed Jul 19, 2006 3:32 pm
Contact:

Emotia and Intel HD3000

Post by kowal »

Hi
I have big problem with my HD3000 and Extron Emotia
when I plug:
1. Intel HD3000 -> Emotia (no signal detection) -> 15khz CRT = no any picture
2. ATI R4350 PCI -> Emotia (correct detection) -> 15khz CRT = picture is fine on CRT
3. Intel HD3000 -> Extron RGB202xi (correct detection) -> 31khz VGA monitor = image is fine
4. Intel HD3000 -> Extron RGB202xi (correct detection) -> Emotia (no signal detection) -> 15khz CRT = no any picture

in theory signal out correct from cards (RGB202xi show it)
Emotia + Radeon works perfectly
why it does not work on Intel card?
gray117
Posts: 1235
Joined: Fri Jul 25, 2008 10:19 pm
Location: Leeds

Re: Emotia and Intel HD3000

Post by gray117 »

Probably a wierd timing issue. Emotia's will react slightly differently depending on exact signal; nvidia has an option to set custom resolutions/timings no idea if intel able to do the same...

e.g.
http://www.epanorama.net/documents/pc/vga_timing.html

Presume trying to basically feed it 640x480 @60hz?
User avatar
kowal
Posts: 122
Joined: Wed Jul 19, 2006 3:32 pm
Contact:

Re: Emotia and Intel HD3000

Post by kowal »

HI
Yes , intel probably sends the wrong signal

signal out on PC boot, and disappears on windows (it looks like a driver issue)
when the PC is on safe mode I get image Emotia
On VGA force mode - no image

yesterday I enable option for multiple monitors (in BIOS)
and now works on extended monitors - signal out from Ati VGA connector (image is cloned from the Intel card (main card))

It helped a little. Now I do not must switch cards in the BIOS. but still I must have ATI card....
maybe intel card require information from monitor on ID0 pin11?
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Emotia and Intel HD3000

Post by Fudoh »

Does your Intel only have a VGA connector or a digital output as well ? You could use a cheap HDMI to VGA converter. This way you don't have to worry about the missing communication or information coming from the Emotia.
User avatar
kowal
Posts: 122
Joined: Wed Jul 19, 2006 3:32 pm
Contact:

Re: Emotia and Intel HD3000

Post by kowal »

mainboard have HDMI DVI and VGA
You know any lag free converter?

unfortunately I sold GBS, It also could help - no way to check this now :|
User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Emotia and Intel HD3000

Post by Fudoh »

You know any lag free converter?
all the cheap ones are lag free. As long as no scaling or other processing is support - just straight input = output resolution, you should fine. These got really small and cheap, less than US$30 I would assume.
User avatar
kowal
Posts: 122
Joined: Wed Jul 19, 2006 3:32 pm
Contact:

Re: Emotia and Intel HD3000

Post by kowal »

User avatar
Fudoh
Posts: 13045
Joined: Mon Mar 06, 2006 3:29 am
Location: Germany
Contact:

Re: Emotia and Intel HD3000

Post by Fudoh »

All three should be fine. And yes, even the cheap ones are proper D/A converters.
Post Reply