Saturn - Sanyo or JVC - How to tell?

The place for all discussion on gaming hardware
Post Reply
User avatar
evil_ash_xero
Posts: 6268
Joined: Thu Jul 12, 2007 6:33 am
Location: Where the fish lives

Saturn - Sanyo or JVC - How to tell?

Post by evil_ash_xero »

I'm looking into buying some official replacement lasers for my Saturns, but there seems to be two different types. Sanyo and JVC. Seems that most Saturns are JVC, but there are
some Sanyos.

Any way I can figure this out? I would prefer not to open up the system, but I can if it's necessary.

EDIT: I opened it up, and on the motherboard it says "ASSY CD UNIT JVC EXL-P605"

I would assume this is a JVC. Am I correct?
eightbitminiboss
Posts: 450
Joined: Mon Sep 17, 2012 9:01 pm

Re: Saturn - Sanyo or JVC - How to tell?

Post by eightbitminiboss »

evil_ash_xero wrote:I'm looking into buying some official replacement lasers for my Saturns, but there seems to be two different types. Sanyo and JVC. Seems that most Saturns are JVC, but there are
some Sanyos.

Any way I can figure this out? I would prefer not to open up the system, but I can if it's necessary.

EDIT: I opened it up, and on the motherboard it says "ASSY CD UNIT JVC EXL-P605"

I would assume this is a JVC. Am I correct?
Yep.
User avatar
s8n
Posts: 256
Joined: Tue Sep 15, 2009 6:30 am

Re: Saturn - Sanyo or JVC - How to tell?

Post by s8n »

theres a way to tell if you laser is a Sanyo without opening it up , around the lens are coils if there are no coils its something else............


btw did you send your Saturn off to the repairer yet , remember the one about a month ago



Image
User avatar
evil_ash_xero
Posts: 6268
Joined: Thu Jul 12, 2007 6:33 am
Location: Where the fish lives

Re: Saturn - Sanyo or JVC - How to tell?

Post by evil_ash_xero »

Yes, I did send it to the repair guy.
The spindle was too low. It works very well now.

However, I'm having problems with a grindy sounding Playstation now. Ugh.

Thanks for the Sanyo information. I'll be able to check out my other Saturn without opening it up.
User avatar
s8n
Posts: 256
Joined: Tue Sep 15, 2009 6:30 am

Re: Saturn - Sanyo or JVC - How to tell?

Post by s8n »

Yes, I did send it to the repair guy.
The spindle was too low. It works very well now.

thats great news im glad its up and running again................


However, I'm having problems with a grindy sounding Playstation now. Ugh.


actually i just greased the rails and gears on 6 of my PS1's , they are easy as pie to work with.

simply once you've taken the screws out from underneath the PS1 take the top shell off , then the CD drive can be removed by 2 cables and it lifts right out.

theres 2 screws in the top of the CD drive they hold a cover on the drive , when the screws have been removed you slide the cover off and the internals of the drive are exposed.

from there you can inspect the drive to see if anything looks incorrect and is causing the ' grindy sound '


Thanks for the Sanyo information. I'll be able to check out my other Saturn without opening it up.


no problemo
User avatar
evil_ash_xero
Posts: 6268
Joined: Thu Jul 12, 2007 6:33 am
Location: Where the fish lives

Re: Saturn - Sanyo or JVC - How to tell?

Post by evil_ash_xero »

Do you have any pics, or links to vids about how to go about greasing the PS1?
User avatar
s8n
Posts: 256
Joined: Tue Sep 15, 2009 6:30 am

Re: Saturn - Sanyo or JVC - How to tell?

Post by s8n »

i dont have any links or vids but i can take some photos tomorrow and label them for you like the Saturn ones i did
User avatar
evil_ash_xero
Posts: 6268
Joined: Thu Jul 12, 2007 6:33 am
Location: Where the fish lives

Re: Saturn - Sanyo or JVC - How to tell?

Post by evil_ash_xero »

I'd appreciate it.
User avatar
s8n
Posts: 256
Joined: Tue Sep 15, 2009 6:30 am

Re: Saturn - Sanyo or JVC - How to tell?

Post by s8n »

hi evil_ash i had a headache for a day and thats what caused the delay but im ok now so heres some pics................



in the below photo remove the screws where the red arrows are

Image


from underneath slide the laser to roughly the middle , sometimes it will take some force to move the laser so if its hard to move dont stress it will move with some force

Image


there are 2 tabs where the arrows are , they are easy to lift with your fingernail or small flathead screwdriver.

when the tabs are lifted the cover should be able to be removed , slide it and it will lift right out to expose the internals

Image


stuff a small amount of tissue where the arrow is , remove when all greasing is done

Image


below are photos where you should grease , also you will want to move the laser here and there as it covers some places to grease

Image

Image

Image
User avatar
evil_ash_xero
Posts: 6268
Joined: Thu Jul 12, 2007 6:33 am
Location: Where the fish lives

Re: Saturn - Sanyo or JVC - How to tell?

Post by evil_ash_xero »

Thanks!
User avatar
s8n
Posts: 256
Joined: Tue Sep 15, 2009 6:30 am

Re: Saturn - Sanyo or JVC - How to tell?

Post by s8n »

hi evil_ash ................... any news on your PS1 ?
User avatar
evil_ash_xero
Posts: 6268
Joined: Thu Jul 12, 2007 6:33 am
Location: Where the fish lives

Re: Saturn - Sanyo or JVC - How to tell?

Post by evil_ash_xero »

Actually, yes. Just greasing it a bit made the difference.

Although, I just bought an unused PS1, and I think they just kind of have noisy drives. They sound kind of weird, compared to other disc based systems I own.

But it sounds smoother now. So, thanks. I do appreciate the help, and the pics.

Above and beyond man.
User avatar
s8n
Posts: 256
Joined: Tue Sep 15, 2009 6:30 am

Re: Saturn - Sanyo or JVC - How to tell?

Post by s8n »

Actually, yes. Just greasing it a bit made the difference.

thats great news with your PS1 its good to hear success stories when i help out in threads

Although, I just bought an unused PS1, and I think they just kind of have noisy drives. They sound kind of weird, compared to other disc based systems I own.

the loudest disc based console ive heard is a Dreamcast

But it sounds smoother now. So, thanks. I do appreciate the help, and the pics.

Above and beyond man.

no problemo
User avatar
evil_ash_xero
Posts: 6268
Joined: Thu Jul 12, 2007 6:33 am
Location: Where the fish lives

Re: Saturn - Sanyo or JVC - How to tell?

Post by evil_ash_xero »

s8n wrote:

the loudest disc based console ive heard is a Dreamcast


The Dreamcast sounds like it's going to launch into space. :lol:
User avatar
s8n
Posts: 256
Joined: Tue Sep 15, 2009 6:30 am

Re: Saturn - Sanyo or JVC - How to tell?

Post by s8n »

hehehe ..............thats a great description evil_ash
Post Reply