Hey guys. I've mainly been a lurker here, looking for what people have been saying about firmware updates and whatnot.
However, I've got an issue with my Framemeister, and it seems
like it's gotten worse over time. Take a look at
the screenshots below. Take a look at
the black are around
the SMB world 1 map, mainly
the top and
the bottom. I show this screen because it illustrates
the problem well.
The problem isn't very visible when there are colors other than black around
the top and bottom
of the screen. On
the NES it presents itself as a glow from
the top and bottom
of the screen. on
the SNES it's a more faint glow from
the top, but on
the bottom also shows up as a horizontal line where
the bottom
of the SNES's picture is.
The issue occurs only on RGB with all consoles. It does not occur when using component, s-video, or composite. I've tried a combination
of different SCART cords along with multiple Framemeister-
to-SCART adapters and I have
the same result each time. I'm using
the Pixel Purist's profiles, and have also tried resetting
to factory defaults with no luck. Also I've tried a different power adapter (PSP-100) and plugged into different outlets, in case there was some kind
of interference going on with
the power. No dice, still happens.
I'm beginning
to fear that something is internally wrong with my Framemeister. Has anyone here seen/heard
of this, and is there anything else I can try before I declare my Framemeister semi-fried?
Thanks!
) hence 
