hi members , I have a Arcooda 32 inch Arcade Monitor and when I connect one of my PS4s to it I get 'no signal'. PS3 shows a resolution message and the LED on the Control Board Lights green but won'tgo further than that. Anyone know what's up ?.
I have tried it with and without my Denon Receiver......no luck. BTW XBOX360 and my MAME PC works
Arcooda 32 inch Arcade Monitor 'no signal' with PS3 and PS4
Re: Arcooda 32 inch Arcade Monitor 'no signal' with PS3 and
Well, what resolutions does it support? If the 360 is set to 480p, then maybe that's the maximum the Arcooda can handle? Does PS3 support 480p?
| My games - http://www.emphatic.se | (Click) I have YEN stickers for sale
RegalSin wrote:Street Fighters. We need to aviod them when we activate time accellerator.
Re: Arcooda 32 inch Arcade Monitor 'no signal' with PS3 and
The Arcooda can handle up to 1080p , and my 360 dashboard picked it up no problemo. I just finished a test and ran my PS4 in Safe Mode and it's output was 576p or I........still didn't display an image. Next I reset my PS3s video and it was also at 576 , still no image.
https://www.arcooda.com/accessories/arc ... cade-ready
https://www.arcooda.com/accessories/arc ... cade-ready
-
Triple Lei
- Posts: 377
- Joined: Fri Apr 01, 2005 8:17 am
Re: Arcooda 32 inch Arcade Monitor 'no signal' with PS3 and
Are you positive your HDMI cables are plugged aaalllll the way in?
Sounds dumb, but this was the fix for me when I couldn't get a picture from my PS4 to display on my TV. It was only when I pushed the cable in real hard into my HDMI switcher that I got a picture. Most importantly, I didn't hear or feel anything pushing the cable in when I got a picture. It just worked when I did push.
I have to also note it was an old HDMI 1.4 cable because I didn't see any need to use my fancier 4K cables with my PS4. Maybe this is just how a "well-worn" HDMI 1.4 cable from Monoprice behaves after a little more than a decade.
Sounds dumb, but this was the fix for me when I couldn't get a picture from my PS4 to display on my TV. It was only when I pushed the cable in real hard into my HDMI switcher that I got a picture. Most importantly, I didn't hear or feel anything pushing the cable in when I got a picture. It just worked when I did push.
I have to also note it was an old HDMI 1.4 cable because I didn't see any need to use my fancier 4K cables with my PS4. Maybe this is just how a "well-worn" HDMI 1.4 cable from Monoprice behaves after a little more than a decade.
Re: Arcooda 32 inch Arcade Monitor 'no signal' with PS3 and
thanks for the tips Lei , I just pushed the cables in real good and same behaviour. Also switched to another Blue Jeans high speed I have (so I've tried 2 cables)
Re: Arcooda 32 inch Arcade Monitor 'no signal' with PS3 and
Maybe a HDCP problem ?
The PS3 forces HDCP onto the HDMI output. On the PS4 it's optional. Streaming services won't work if you disable it.
The PS3 forces HDCP onto the HDMI output. On the PS4 it's optional. Streaming services won't work if you disable it.
Re: Arcooda 32 inch Arcade Monitor 'no signal' with PS3 and
hi guys I'm back , Fudoh you nailed it. I disabled HDCP on my PS4 and tested it , simply it worked like a charm. As we know PS3 doesn't have that option so I bought a HDMI Splitter , that should bypass HDCP for that console. Really stoked guys thanks all for your input.
Re: Arcooda 32 inch Arcade Monitor 'no signal' with PS3 and
hi guys , just reporting that I got the HDMI Splitter and PS3 is now up and running as well.