PAL 360 on an NTSC CRT
PAL 360 on an NTSC CRT
I have a modded PAL Xbox 360 that I'd like to be able to use on an NTSC tube tv via component. Am I out of luck? SD Output is set to PAL 60.
Re: PAL 360 on an NTSC CRT
Think it should work in component.
I have a pal snes with a supercic,when the console is set to ntsc it works on my crt via component just fine.
I have a pal snes with a supercic,when the console is set to ntsc it works on my crt via component just fine.
Re: PAL 360 on an NTSC CRT
The problem is I don't know if it's actually able to be set to output NTSC.
PAL 60 is not NTSC, right?
Console is also modded and has Aurora on it if there is any mod you can do using homebrew, as well.
I've tried component and composite on my CRT and I get a rolling black and white picture.
PAL 60 is not NTSC, right?
Console is also modded and has Aurora on it if there is any mod you can do using homebrew, as well.
I've tried component and composite on my CRT and I get a rolling black and white picture.
Re: PAL 360 on an NTSC CRT
Reading up more on the 360,since yours is modded you can make the system ntsc but that requires you to reflash your nand.