Hello!
I bought a GBS-C from Aliexpress that is working fine, except when I play a game that have a really white screen. On these cases, GBS lost the sync and recover after some seconds. My unit is the "complete" version, with clock generator and HDMI converter.
For example, the opening screen from Sonic 2 on Mega-Drive, the first screen on Banjo-Kazooie on N64 (the walking N64 logo) or the opening screen of Konami games on SNES.
Anyone faced this issue before?
Thanks a lot!
GBS-C (Aliexpress) lost sync on white screens
-
NoAffinity
- Posts: 1028
- Joined: Mon May 07, 2018 5:27 pm
- Location: Escondido, CA, USA
Re: GBS-C (Aliexpress) lost sync on white screens
This was resolved in firmware some years ago. Update to the latest firmware.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Re: GBS-C (Aliexpress) lost sync on white screens
Thanks for your reply!
I will attempt and comment later.
I will attempt and comment later.
Re: GBS-C (Aliexpress) lost sync on white screens
I did the update yesterday and now is working better. Also I removed the 3 pots from RGB line and soldered a 100 ohms resistor on sync and ground pins.NoAffinity wrote:This was resolved in firmware some years ago. Update to the latest firmware.
Sent from my SM-G955U using Tapatalk
Thanks again!
-
NoAffinity
- Posts: 1028
- Joined: Mon May 07, 2018 5:27 pm
- Location: Escondido, CA, USA
Re: GBS-C (Aliexpress) lost sync on white screens
Glad it worked out. Remember - the 100 ohm resistor is only for rgbs input. If inputting vga, it should be removed. Doesnt matter either way for ypbpr.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk