I have a white Samsung 32 inch monitor. I really hate the stand. It's wobbly, and has that shiny plastic that looks old after a few cleanings.
I was wanting to get something sturdier, and maybe made with another material.
I'm having a hard time finding something, because the Vesa holes (75mm) are at the bottom of the monitor, rather than the center.
Getting it in white would be pretty necessary, too.
I'm looking for something like this, but able to hold a 32 inch monitor. This only goes to 24.
Need some advice on monitor stand.
-
evil_ash_xero
- Posts: 6181
- Joined: Thu Jul 12, 2007 6:33 am
- Location: Where the fish lives
Re: Need some advice on monitor stand.
When I gave up on "monitor" stands and searched "VESA TV Stand" I found "VIVO Single 13 to 32 inch Monitor Desk Stand" on Amazon, what do you think?
-
evil_ash_xero
- Posts: 6181
- Joined: Thu Jul 12, 2007 6:33 am
- Location: Where the fish lives
Re: Need some advice on monitor stand.
Those are a bit too tall, and most of them are pole shaped. I'm trying to find a "normal" looking stand, like the one in the pic. There is one that is similar, but it's very tall, and since the VESA holes are near the bottom of the monitor, it would make it even taller.Galgomite wrote:When I gave up on "monitor" stands and searched "VESA TV Stand" I found "VIVO Single 13 to 32 inch Monitor Desk Stand" on Amazon, what do you think?
I was hoping maybe there would be some computer equipment store, online. I've looked all through Amazon.
My Collection: http://www.rfgeneration.com/cgi-bin/col ... Collection
Re: Need some advice on monitor stand.
The one you're showing here is WAY sturdier than it looks and quite heavy indeed. I got that one for a 10" LCD and it was way overkill. Should be no problem to attach a LIGHT 32 incher to it, if it indeed has the VESA mounting holes towards the bottom end of the chassis.
-
evil_ash_xero
- Posts: 6181
- Joined: Thu Jul 12, 2007 6:33 am
- Location: Where the fish lives
Re: Need some advice on monitor stand.
Hmm... Ok. I'll try it out.Fudoh wrote:The one you're showing here is WAY sturdier than it looks and quite heavy indeed. I got that one for a 10" LCD and it was way overkill. Should be no problem to attach a LIGHT 32 incher to it, if it indeed has the VESA mounting holes towards the bottom end of the chassis.
My Collection: http://www.rfgeneration.com/cgi-bin/col ... Collection