Framemeister Component Stopped Working...

[kennygunit]

Hello! I seem to be having issues with the component input on my Framemeister. I haven't used it in a couple months, and i moved it over to my new entertainment room setup. When i plug my PS2 into the D-Terminal input, my TV doesn't recognize anything. When i switch to composite or RGB, everything works great.

Things i've tried:
1) Updating the Framemeister Firmware
2) Test the PS2 on a known good TV directly through component (PS2 and Cable are fine)
3) Test a 2nd Component to D-Term adapter
4) Tried a different HDMI out cable

I really hope there is just something i'm missing!

Setup:
Samsung UN78HU9000 4k TV
Denon X1600H Receiver


Thanks

[nmalinoski]

Is your PS2's component output set to RGB instead of YPbPr?

If so, do you have a different device that outputs YPbPr component that you can test with?

[kennygunit]

Yea, the PS2 is on the correct setting. I verified it when i plugged it directly into another TV.

I also have a Wii that I tested as good, and that doesn't seem to work with the framemeister either.

[ldeveraux]

I had a similar problem once when I rearranged my setup. I was able to disable the video processing/upscaling on my receiver and that fixed it.