Here’s a picture. The lifted pad is the very first pad on the bottom right.
NESRGB lifted ppu pad
NESRGB lifted ppu pad
Hey all. Was desoldering the PPU and noticed one of the via pads lifted. The via doesn’t have a trace connected to it so I’m a bit confused as to if I need to fix it or not. Surprisingly I do still have the pad. Not really sure how pads are connected to the PCB ... could I glue it back on? Or do I even need to worry about it since it’s not connected to a trace on this side of the board?
Here’s a picture. The lifted pad is the very first pad on the bottom right.
Here’s a picture. The lifted pad is the very first pad on the bottom right.