shmups.system11.org

Shmups Forum
 
* FAQ    * Search
 * Register  * Login 
It is currently Sat Jan 25, 2020 6:15 am View unanswered posts
View active topics



Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: WiiDual install test - Sound and OSD help
PostPosted: Sun Jan 12, 2020 1:34 pm 



Joined: 03 May 2018
Posts: 4
Apologies if I've posted this in the wrong area or duplicated an old topic. Looking for some advice or tips on a WiiDual install and appreciate any help from other pro and experienced modders.

I have just installed a WiiDual (1.1 pcb board) onto my Wii. I made sure to test continuity on each pin of the flex (actually from the AVE pins) to ensure no bridges and signal reaches the WiiDual pcb board. Removed all components on RGB and Composite lines on Wii main board per citrus3000psi's video. I've also installed a wire to the gamecube controller port 1 test pad to P.

On boot up, I get an image over HDMI that my test lcd says 720x480. My tv is a basic 720p LCD. I don't hear any sound and my GC controller in port 1 can't pull up the OSD. Is the L and R sound supposed to come from the AVE chip or the multiout pins? As for the OSD, my gamecube controller is a cheap aftermarket one, so not sure if it's why it can't pull up the menu. Thanks everyone for the help!


Top
 Offline Profile  
 
 Post subject: Re: WiiDual install test - Sound and OSD help
PostPosted: Sun Jan 12, 2020 2:32 pm 


User avatar

Joined: 09 Aug 2017
Posts: 1311
Location: Australia
I am one of Dans installers.

Controller must be plugged in before booting the system. Be sure its in the port you wired to.

If no audio, bring up OSD and turn on enhanced DVI mode and save settings.


Top
 Offline Profile  
 
 Post subject: Re: WiiDual install test - Sound and OSD help
PostPosted: Sun Jan 12, 2020 7:33 pm 



Joined: 03 May 2018
Posts: 4
Much appreciated Syntax! This worked. I think my 3rd party Gamecube controller isn't supported by my Wii so I was able to get the OSD menu using a universal remote.


Top
 Offline Profile  
 
 Post subject: Re: WiiDual install test - Sound and OSD help
PostPosted: Mon Jan 13, 2020 12:20 am 


User avatar

Joined: 09 Aug 2017
Posts: 1311
Location: Australia
No problem happy to help.

Did you need to have the remote super close to the wii?


Top
 Offline Profile  
 
 Post subject: Re: WiiDual install test - Sound and OSD help
PostPosted: Mon Jan 13, 2020 11:44 am 



Joined: 03 May 2018
Posts: 4
My test workbench is tight quarters so at first I thought it needed to be right near the IR sensor, but in reality my remote worked with me sitting in my chair around 2-3 ft away. I didn't think it felt particlularly so. Any concerns I should have?


Top
 Offline Profile  
 
 Post subject: Re: WiiDual install test - Sound and OSD help
PostPosted: Mon Jan 13, 2020 12:07 pm 


User avatar

Joined: 09 Aug 2017
Posts: 1311
Location: Australia
I've just heard you need to use the remote almost touching the back of the Wii. I havent tried myself so was curious. Thanks.


Top
 Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC


Who is online

Users browsing this forum: Ironcan and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Space Pilot 3K template by Jakob Persson
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group