shmups.system11.org

Shmups Forum
 
* FAQ    * Search
 * Register  * Login 
It is currently Thu Feb 27, 2020 2:20 am View unanswered posts
View active topics



Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Do any DVDO upscalers output audio over HDMI?
PostPosted: Sat Dec 07, 2019 11:01 pm 



Joined: 07 Dec 2019
Posts: 2
I registered this account solely because of how nuts it's driving me that nothing I touch from DVDO seems to work.

The following tests were done on 3 different displays - A monitor with built-in speakers, a capture card and a TV. All of them exhibited the same behavior, and worked perfectly fine when the devices used for testing were directly connected to them.

The first upscaler I got a hold of was a VP30 with the De-Interlacer Card: I tested it out of the box and managed to get a picture but heard no sound. Everything I threw at it came out mute. So I updated it to the latest firmware, but HDMI still produced no audio. All of this is regardless of cables/settings/etc. - e.g. if I have my Saturn plugged in (Stereo RCA+SVideo) and the VP30 set to AUDIO IN: Stereo + AUDIO OUT: HDMI, I'll only get video and hear no sound at all. However, even if I do HDMI passthrough it doesn't want to listen, where plugging in a MegaSG with the appropriate I/O settings enabled in the upscaler it STILL produces no HDMI audio yet the optical out produces sound. Go figure. :roll:

The next DVDO product that found it's way to my home was an Edge Green: I immediately fired it up hoping this would be the end of my HDMI audio nightmare only to get immediately smacked in the face with yet another "Video but no Audio" situation. :x Again, no amount of settings adjustments seem to fix the problem. If I plug in the Saturn via SVideo+RCA, and set the DVDO to Stereo In>HDMI Out, I'll get video but no sound - Likewise if I plug in the MegaSG to HDMI 1/2/3/4/5 and tell it to do HDMI In/HDMI Out, I'll again get a picture but no audio at all - and for the record the VP30 and the Edge Green will report that they see the audio signals, they just utterly refuse to output it. Updated the firmware for this device too, it still wouldn't make a peep.

Both devices were factory reset after their respective firmware updates to ensure it wasn't a configuration problem, and I want to reiterate that connecting the Saturn/MegaSG directly to these 3 displays all produce video and audio just fine, albeit with terrible internal upscaling (which was the point of buying the DVDO). Tried the 1919 trick, the audio offset trick, letting them warm up/cool down/unplugging them, etc. All to no avail.

Am I missing something here? :cry:


Top
 Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC


Who is online

Users browsing this forum: diamondtron, Google [Bot], NormalFish and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Space Pilot 3K template by Jakob Persson
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group