Wide-narrow jumper on Nanao MS8-18 series

The place for all discussion on gaming hardware
Post Reply
User avatar
erzane
Posts: 97
Joined: Wed Apr 01, 2009 12:32 pm

Wide-narrow jumper on Nanao MS8-18 series

Post by erzane »

Hi guys,
I'd like to know if this shema is correct. Also, should I use 18awg, maybe 22awg is too thin?
About the connector: what's happend if, when I turn-on the cab/monitor, the connectors are disconnect like in this shema? I know it do not have any sens to make this wiring and leave it disconnected, but I'd like to know what kind of effect it will occurs on resolution, also maybe it can do a short-circuit, or totaly safe?
Thanks!!
Image
Post Reply